OEM Husqvarna Lawn Tractor Accessories Parts & Accessories

Bearing

$6.21

Fix Number: FIX9006914
Manufacturer Part Number: 532009040

This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.

Ring Klip Number T5304-75

$3.99

Fix Number: FIX9143890
Manufacturer Part Number: 812000029

This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.

Cap Axle Black 1 50 x 1 00

$3.99

Fix Number: FIX9007667
Manufacturer Part Number: 532104757

This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is goes missing or appears damaged. No tools are necessary for this easy repair, simply locate the cap axle on the rim of the wheel and remove.

Washer 25/32 x 1-1/4 x 16 Ga.

$3.99

Fix Number: FIX9008998
Manufacturer Part Number: 532121749

This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to spread the load under a bolt or screw. It also helps to reduce heat and friction as the fastener is tightened. This repair may require a screwdriver or socket wrench, depending on the fastener for your model. This is a single flat washer; the fasteners are sold separately.

Bolt and Washer Assembly

$8.71

Fix Number: FIX9020856
Manufacturer Part Number: 532193003

This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.

Wheel

$4.99

Fix Number: FIX12630280
Manufacturer Part Number: 589527301

Wheel.gage.half.spoked

Blade Mower

$16.18

★★★★★

1 Review

Fix Number: FIX9286056
Manufacturer Part Number: 532138971

This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.

Nut, Hex, Flangelock

$4.99

Fix Number: FIX9022497
Manufacturer Part Number: 532409149

This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. For this repair you will need a wrench set.

Pulley Idler

$26.14

Fix Number: FIX9287043
Manufacturer Part Number: 532196106

This blade idler pulley (part number 196106) is for lawn tractors. Blade idler pulley 196106 applies tension to the blade belt, allowing the belt to turn.

Switch-Ign

$14.93

Fix Number: FIX9020864
Manufacturer Part Number: 532193350

This ignition switch has been sourced directly from the original manufacturer and is sold individually (key sold separately). The ignition switch is also sometimes referred to as a starter switch and is enclosed in a plastic housing. A common sign that this part is malfunctioning is if the electric starter is not engaging. For this quick and easy repair, start by making sure the switch is in the off position and the key has been removed. Lift the hood up, locate the steering housing and press the tabs to disengage the old switch. Disconnect the wires and install your new OEM ignition switch.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

MICHELE h from ARGYLE, NY

Barely turns over to start, dead battery

Disconnected battery, unplugged key switch, using screwdriver removed old switch and replaced with new switch. Removed battery cables from old solenoid and replaced with the new one. End results still doesn't turn over enough to start it. Failed repairs Read more...

Husqvarna Lawn Tractor Accessories Parts

Popular Husqvarna Lawn Tractor Accessories Parts

Installation Instructions

Appliance Type

Popular Husqvarna Lawn Tractor Accessories Models

Husqvarna Lawn Tractor Accessories Parts

Start With Your Model Number

Popular Husqvarna Lawn Tractor Accessories Parts

Installation Instructions

Appliance Type

Popular Husqvarna Lawn Tractor Accessories Models