Official Murray Lawn Mower Bearings

Lawn Mower Flange Wheel Bearing

$12.05

Fix Number: FIX9006914
Manufacturer Part Number: 532009040

This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.

Watch the install video

Mandrel Ball Bearing

$18.65

Fix Number: FIX9285698
Manufacturer Part Number: 532110485

This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of the mandrel assembly. The mandrel assembly is bolted to the more deck. This bearing measures roughly 1-3/8-Inches inner diameter, 1.578-Inches outer diameter, and .475-Inches long.

Lawn Mower Bearing

$6.55

Fix Number: FIX9010748
Manufacturer Part Number: 532003366

This is an authentic OEM bearing for lawn tractors and lawn mowers. Bearings provide a cushion for moving components, so they do not damage due to the constant rubbing against each other. They also help to stabilize directional movement. Bearings tend to deteriorate over time, which is normal. They should be inspected and replaced regularly, so it may be a good idea to have a few on-hand. Keep in mind that this part includes one bearing only, gauges, washers, rings, etc. are all sold separately.

Hexagonal Flange Bearing

$7.04

Fix Number: FIX9416292
Manufacturer Part Number: 741-04124

This is a high-quality OEM hex flange bearing for use in riding lawn tractors (sold individually). This part has multiple applications, so the location and repair information may differ depending on the model and reason for replacement. This metal hex flange is flat on one side (similar to a washer) and has a hexagon shape on the other. For this repair you will need a wrench to disassemble and assemble it.

Bearing, Ball 11/16x1

$9.85

Fix Number: FIX8887153
Manufacturer Part Number: 1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Snow Blower Greased Bearing

$13.36

Fix Number: FIX9270711
Manufacturer Part Number: 2108202SM

This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, which spreads the weight equally whilst the minimal contact area of the part reduces the friction. It is important to repeatedly check for bearings and replace them periodically as they experience constant wear when in operation from pressure, vibration, and heat. For this repair you will need a screwdriver and a set of wrenches. Remember to unplug or turn off power tool before starting this installation project.

Lawn Mower Flange Bearing

$6.51

★★★★★

3 Reviews

Fix Number: FIX9122043
Manufacturer Part Number: 741-0660A

This is a manufacturer-approved replacement flange bearing for a lawn tractor. It is sold individually. The function of this part is to help secure the axle assembly to the pivot axle. It also allows the axle to move with ease. This part is designed to handle constant use and pressure, but it is prone to wear over time, so should be checked consistently and replaced when it starts to wear.

Wheel Bearing

$14.25

Fix Number: FIX16299711
Manufacturer Part Number: 1752171YP

This genuine OEM part is compatible with a variety of Snapper, Simplicity, and Murray tractors/mowers. Bearings allow moving parts (axles and wheels in this case) free motion and steady operation. They stabilize directional motion while reducing friction between moving parts. Bearings are high wear parts which often need regular replacement to function at their peak. Sold separately.

Ball Bearing

$30.75

Fix Number: FIX9167899
Manufacturer Part Number: 941-0600

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part diagram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

Bearing:flange

$7.98

Fix Number: FIX9112939
Manufacturer Part Number: 741-0516B

This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and reduce friction. They are a very high wear item that may require replacement often. Sold individually.

Murray Lawn Mower Bearings

Popular Murray Lawn Mower Bearings

Related Murray Lawn Mower Parts

Murray Lawn Mower Bearings

Start With Your Model Number

Popular Murray Lawn Mower Bearings

Related Murray Lawn Mower Parts