Official Murray Lawn Mower Control Cables

CABLE-CONTROL 37.5

$20.80

Fix Number: FIX19305064
Manufacturer Part Number: 946-04661A

This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When the control handle is released, the control cable stops the blade. If the cable breaks, the brake will not release even after pressing the lever. To remove the old cable, cut off any cable ties, remove the cable end from the control bail, and remove the control cable from the engine (you may need pliers). Remove the cables from the openings on the handle, which can be twisted off by rotating the cable at a 90-degree angle.

Lawn Mower Engine Control Cable

$24.82

Fix Number: FIX9015022
Manufacturer Part Number: 532183567

This is a lawn mower engine control cable, also sometimes referred to as a zone control cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-type bent ends, a rubberized exterior, and a plastic clip. This part is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.

Fixes these symptoms

Will Not Start
See more...

Cable:engagement D

$71.88

Fix Number: FIX10033928
Manufacturer Part Number: 946-04173E

This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wire cable, a rubber cover and an extension spring on one end and a Z-bend on the other. The cable casing length is approximately 39-inches and the inner wire length is about 56-inches.

Lawn Mower Zone Control Cable

$20.95

★★★★★

1 Review

Fix Number: FIX9180334
Manufacturer Part Number: 946-1130

This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.

Fixes these symptoms

Will Not Start
See more...

Engine Zone Control Cable

$20.67

Fix Number: FIX9014267
Manufacturer Part Number: 532183281

This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubberized engine zone control cable is sold individually.

Throttle Cable

$20.67

Fix Number: FIX12609193
Manufacturer Part Number: 582991501

Genuine OEM replacement part, this item is sold individually. The Engine Control Cable connects to the Control Bar and to the Engine. The Control Bar has to be pulled up for the Engine to start. Once you let go of the Control Bar the Engine Control Cable will cause the Engine to stop running.

Cable-ers Control

$32.88

Fix Number: FIX10033969
Manufacturer Part Number: 946-04703A

This is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note this high-quality rubber insulated metal cable is sold individually.

Control Cable

$31.34

Fix Number: FIX12604727
Manufacturer Part Number: 532162778

The engine zone control cable stops the blade when the control handle is released on walk-behind lawn mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. This is a genuine OEM sourced replacement part that is designed for use with lawn mowers. Please note this durable metal rubber insulated cable is sold individually.

Cable, Bail, 22 Wbm

$23.93

Fix Number: FIX9299090
Manufacturer Part Number: 7101395YP

This authentic replacement part is supplied directly from the original equipment manufacturer for use on Murray and Snapper walk-behind lawn mowers. The cable stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. Keep in mind this high-quality rubber insulated component is sold individually. Refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure.

Clip, Cable

$6.25

Fix Number: FIX9016842
Manufacturer Part Number: 532197991

Murray Lawn Mower Control Cables

Popular Murray Lawn Mower Control Cables

Related Murray Lawn Mower Parts

Murray Lawn Mower Control Cables

Start With Your Model Number

Popular Murray Lawn Mower Control Cables

Related Murray Lawn Mower Parts