Craftsman Edger Parts

Craftsman Appliance Parts

Popular Craftsman Edger Parts

SA SPOOL AND LINE DUAL
$17.82
In Stock
Fix Number
FIX18988542
Manufacturer Part Number
90567225N
This is a genuine Black and Decker replacement part,it is sold individually. This is the part of the String Trimmer that contains the cutting line. This part includes the spool and cutting line for the models shown below. This is a dual line spool. The cutting line is .065 gauge. It is replaced by removing the spool cover and placing it inside the spool housing, then feed some line through the spool housing and replace the spool cap.
Snow Blower Star Knob
$10.63
In Stock
Fix Number
FIX9109078
Manufacturer Part Number
720-04072A
This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve your problem. No tools are required for this repair. For installation instructions and more information on the part, refer to the manual provided by the manufacturer. This knob is secured with a carriage bolt, which is sold separately. *Please note: this knob is sold separately as well.
Fuel Line
$14.92
In Stock
Fix Number
FIX9008192
Manufacturer Part Number
530069599
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part can become weak and crack over time due to its constant contact with fuel, in which case will need to be replaced. It is sold separately and is an OEM quality replacement part.
Fixes these symptoms
Tiller Jamlock Nut
$6.25
In Stock
Fix Number
FIX9299545
Manufacturer Part Number
712-0266A
Lawn Mower Ground Drive Belt
$31.80
In Stock
Fix Number
FIX9172714
Manufacturer Part Number
954-04032B
This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.
Edger Blade
$11.92
In Stock
Fix Number
FIX9129938
Manufacturer Part Number
781-0080-0637
This edger blade is an OEM part direct from Craftsman for edgers. This part connects to the drive shaft to edge and cut grass. It is recommended to review your models diagram to verify the parts compatibility. You will need a wrench to replace this part. This edger blade is made of metal and sold individually.
Fuel Tank Asm
$33.60
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11812933
Manufacturer Part Number
753-06797
This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.
Fixes these symptoms
Cultivator Air Filter
$6.25
In Stock
Fix Number
FIX9117898
Manufacturer Part Number
753-05996
This filter is an authentic OEM replacement part sourced directly from the manufacturer. It is commonly used in MTD and Troy-Bilt tillers and cultivators. This part filters the air entering the carburetor. Without a proper air filter, the machine may stop running. It should be replaced if it is worn or clogged beyond cleaning. It is sold individually, and a screwdriver is needed to replace it.
★★★★★
★★★★★
1 Review
Fix Number
FIX9119304
Manufacturer Part Number
753-06240
This is an authentic fuel tank assembly for a trimmer. This assembly includes the fuel tank, fuel lines, and a fuel cap. Please note that the tabs used to secure the tank are sold separately. Replacing this fuel tank assembly will solve a leaking fuel tank, deteriorated fuel lines, or a broken fuel cap. If your fuel tank is leaking, this assembly should solve the issue. Never run your equipment with a damaged fuel tank, as this is unsafe. Before making this repair, be sure to drain the gas tank.
Edger Blade
$21.60
In Stock
Fix Number
FIX11925341
Manufacturer Part Number
243801-00
This is a genuine replacement Blade for the Black and Decker Edgers shown below. This is a new style Blade for these edgers. If this is the first time you have used this new Blade, you will need to order two of the part number 243797-00 Washers for this new Blade. Or you can order part number EB-007AL 7 1/2" Blade (Includes 2 Washers).

Craftsman Edger Appliance Types

Related Craftsman Edger Parts

Popular Craftsman Edger Models