Start With Your Model Number
Popular Chainsaw Hardware
Fuel Line Grommet
Fix Number FIX8859978
Manufacturer Part Number 13211546730This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.
Fix Number FIX9995391
Manufacturer Part Number 6697846This is a return grommet for your lawn and garden equipment. This part creates an airtight seal to prevent fuel leaking from your machine. We recommend installing both the grommet and the return fuel line together. Place the return fuel line inside the grommet and install both into the fuel tank.
Fix Number FIX9236120
Manufacturer Part Number V265000200The nut flange is part of the chain brake and is fastened onto the sprocket guard. It is sold individually, however, your equipment likely has a couple of these. If the housing cracks, this could cause the nut flange to become loose or lost, in which case it will need to be replace with this OEM replacement part. This nut flange (or lock nut) is designed to resist loosening once it has been properly threaded onto a bolt. For this repair you will need a 13mm or 12-inch nut wrench.
Fix Number FIX9234675
Manufacturer Part Number V203000110This chain adjustment tensioner bolt (bar adjustment bolt) is sold individually. The bar adjustment bolt works with the adjuster gears and the adjustment pin to alter the tension on the cutting chain. The gears rotate the bolt, and as it turns, it pulls the adjustment pin, which moves the bar. The bolt can strip over time or if the chain is consistently over tensioned. This is a manufacturer-approved part designed to be a direct replacement for the original.
Fix Number FIX10053748
Manufacturer Part Number V490001230This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
Fix Number FIX9472730
Manufacturer Part Number 530071945This is a washer kit for a chainsaw. This kit includes the retaining washer, C-ring, and the washer that is located between the clutch and clutch drum assembly. The outer washer acts like a shoulder to keep the chain on the sprocket as well as helps secure the clutch drum to the saw. Due to its consistent contact with the chain, the outer washer is known to deteriorate over time. If the chain is regularly run with minimal tension, this will actually speed up the deterioration and cause the chain to move from side-to-side. The retainer C-clip should be replaced any time it has been removed. For this repair you will need to remove the side cover, the chain, and the bar.
Nut M8 Flange
Fix Number FIX8990057
Manufacturer Part Number 503220001This is a hex nut flange for your lawn and garden tools. It is size M8, meaning it has an 8mm inner diameter, and a 1.25 thread pitch. The hex nut has a washer like base to ensure the nut stays tight. This is most commonly used in chainsaws.
Flange Nut 6
Fix Number FIX9279274
Manufacturer Part Number 43301903933This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guard, etc. The size of this flange nut is No.6.
Fix Number FIX9237151
Manufacturer Part Number V224000031This part is the replacement stud for your chainsaw. It is approximately 1 ¼ inches long and is black in color. The stud secures the chain bar to the chainsaw. It the stud is damaged or missing, it can become a safety hazard, and will need to be replaced. This part is sold individually and is an OEM part sourced directly from the manufacturer.