Husqvarna Chainsaw Hardware

Husqvarna Appliance Parts

Popular Husqvarna Chainsaw Hardware

Ring Klip Number T5304-75
$3.99
On Order
Fix Number
FIX9143890
Manufacturer Part Number
812000029
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.
Washer Head Screw
$3.99
In Stock
Fix Number
FIX9982804
Manufacturer Part Number
584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is damaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Bolt and Washer Assembly
$8.71
In Stock
Fix Number
FIX9020856
Manufacturer Part Number
532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
Washer 25/32 x 1-1/4 x 16 Ga.
$3.99
On Order
Fix Number
FIX9008998
Manufacturer Part Number
532121749
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to spread the load under a bolt or screw. It also helps to reduce heat and friction as the fastener is tightened. This repair may require a screwdriver or socket wrench, depending on the fastener for your model. This is a single flat washer; the fasteners are sold separately.
Nut, Hex, Flangelock
$4.99
In Stock
Fix Number
FIX9022497
Manufacturer Part Number
532409149
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. For this repair you will need a wrench set.
Washer Hardened
$4.99
On Order
Fix Number
FIX9015920
Manufacturer Part Number
532188967
Washer-Spacer
$3.99
In Stock
Fix Number
FIX9286886
Manufacturer Part Number
532187690
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are approximate). In general, washers help to spread load, can provide insulation such as electrical, and can also help to prevent galvanic corrosion.
Nut-Push
$3.99
On Order
Fix Number
FIX9285696
Manufacturer Part Number
532110452
Screw
$4.99
On Order
Fix Number
FIX9009676
Manufacturer Part Number
532137729
This is a single OEM replacement screw for a lawn mower. This flanged hex head screw measures 1/4-20 by 5/8. It is used in various applications, so we recommend checking the diagram related to your model for its exact location.
Nut - Bar Mounting
$3.99
In Stock
Fix Number
FIX9469166
Manufacturer Part Number
530015917

Related Husqvarna Chainsaw Parts