Echo Chainsaw Hardware

Fuel Line Grommet This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.

Clip

Nut The nut flange is part of the chain brake and is fastened onto the sprocket guard. It is sold individually, however, your equipment likely has a couple of these. If the housing cracks, this could cause the nut flange to become loose or lost, in which case it will need to be replace with this OEM replacement part. This nut flange (or lock nut) is designed to resist loosening once it has been properly threaded onto a bolt. For this repair you will need a 13mm or 12-inch nut wrench.

Clip This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.

Flange Nut 6 This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guard, etc. The size of this flange nut is No.6.

Bolt 5 This chain adjustment tensioner bolt (bar adjustment bolt) is sold individually. The bar adjustment bolt works with the adjuster gears and the adjustment pin to alter the tension on the cutting chain. The gears rotate the bolt, and as it turns, it pulls the adjustment pin, which moves the bar. The bolt can strip over time or if the chain is consistently over tensioned. This is a manufacturer-approved part designed to be a direct replacement for the original.

Nut 5 This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.

Stud This part is the replacement stud for your chainsaw. It is approximately 1 ¼ inches long and is black in color. The stud secures the chain bar to the chainsaw. It the stud is damaged or missing, it can become a safety hazard, and will need to be replaced. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Split Pin 2x22

Screw-5x16