Part Location Diagram of WH16X10159 GE Rear Suspension Rod & Spring Assembly - Red
See part 415 in the diagram
Replacing your General Electric Washer Rear Suspension Rod & Spring Assembly - Red
( Grid squares measure 1x1 inch )

Rear Suspension Rod & Spring Assembly - Red WH16X10159

Rated by 1 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$87.83
In Stock
Fix Number:
FIX3654191
Manufacturer #:
WH16X10159
Manufactured by:
GE

Product Description

This rear suspension rod helps stabilize the washer tub and reduce vibration during spin cycles. It’s a genuine replacement part for select GE and Hotpoint washing machines and is ideal for fixing issues like shaking, banging, or an off-balance tub. Be sure to confirm your model number before installation.

Videos For installing this part.

Replacing your Rear Suspension Rod & Spring Assembly - Red

Replacing your Rear Suspension Rod & Spring Assembly - Red

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Larry from PEARLAND, TX
Parts Used:
WH16X10159, WH16X10158
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Unbalanced load/severe shaking
Unplug the machine and detach water supply. Remove control panel (slide to the side) and unplug harnesses. Remove front panel, pop loose from lid with putty knife. Remove lid, two screws on front a wire retaining clip and the lid switch(squeeze tab from below lid). Remove control panel back panel, control panel bracket and trim, three scr ews. Remove old suspension rod (x4); lift tub, push lower bushing out with something like a hammer handle or stick, detach upper bushing from below (squeeze tabs) lower and remove rod. Install new suspension rods in the reverse of removal and reassemble machine in reverse of disassembly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX3654191
Manufacturer Part Number: WH16X10159
Brand Model Number Description
General Electric GBAN2800F0WW Washer - WASHER
General Electric GCAP1800D0WW Washer
General Electric GCAP1800D1WW Washer
General Electric GCWN2800D0WW Washer
General Electric GCWN2800D1WW Washer
General Electric GCWN2800D2WW Washer - WASHER
General Electric GCWN4950D0WS Washer
General Electric GCWN4950D1WS Washer
General Electric GCWN4950D2WS Washer - WASHER
General Electric GCWN5550D0WW Washer
General Electric GCWP1800D0WW Washer
General Electric GCWP1800D1WW Washer
General Electric GCWP1805D0CC Washer
General Electric GCWP1805D1CC Washer
General Electric GHWN4250D0WW Washer
General Electric GHWN4250D1WW Washer
General Electric GHWN4250D2WW Washer - WASHER
General Electric GHWN5250D0WS Washer
General Electric GHWN5250D1WS Washer
General Electric GLWN2800D0WS Washer
General Electric GLWN2800D1WS Washer
General Electric GLWN2800D2WS Washer - WASHER
General Electric GLWN5250D0WW Washer
General Electric GLWN5250D1WW Washer
General Electric GLWN5550D0WW Washer
General Electric GLWN5550D1WW Washer
General Electric GMAN2800D0WS Washer
General Electric GMAN2800D1WS Washer
General Electric GMAN2800D2WS Washer - WASHER
General Electric GMAN4250F0WS Washer