Washer Transmissions and Clutches

★★★★★

★★★★★

2 Reviews

Fix Number

FIX6012095

Manufacturer Part Number

W10528947

The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may require a new drive hub assembly. This genuine OEM kit comes with a new hub and a fork holder. To replace this part, you will need to remove the agitator from the tub to expose the hub assembly. Use a flat blade screwdriver to remove the fork shaped holder, and then remove the screws holding the hub assembly to the transmission shaft. Place the new hub onto the shaft, and rotate the washer tub to line up the holes. Once lined up, drill the screws back into place. Please note that this kit does not come with replacement screws, so you will need to reuse the ones from the old hub. The new fork holder is then put through the slotted opening, using a small hammer to tap it into place. Once you have installed the new part, be sure to follow the instructions on the pamphlet provided with the hub to calibrate your washer.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX334641

Manufacturer Part Number

285785

This is a genuine OEM replacement clutch assembly for your washing machine. A clutch assembly, also known as a clutch or a washer clutch, is responsible for spinning the tub during the spin cycle. If the clutch becomes worn and is no longer operating properly, your clothes will remain soaked after the cycle is finished. Some other signs it is time to replace the clutch is if your washer is noisy while running, there is a burning smell, or the machine is shaking excessively. This kit comes with the clutch, brake cam driver, spring, retaining ring, and a nylon anti-rattle clip. Before beginning this repair, be sure to disconnect the power and water supply to your machine. Depending on your washer model, you may need an additional person to help lower the machine onto its back, as access to the drive shaft to change the clutch assembly may be easiest through the bottom of the appliance.

★★★★★

★★★★★

1 Review

Fix Number

FIX11769864

Manufacturer Part Number

W10913953

This 6-pin shift actuator controls the washer’s transmission, allowing it to switch between agitating and spinning. It’s a common fix for washers that won’t spin, get stuck mid-cycle, or make odd noises. Compatible with select models and easy to install with basic tools.

Fix Number

FIX11729473

Manufacturer Part Number

WH05X24185

★★★★★

★★★★★

1 Review

Fix Number

FIX16220911

Manufacturer Part Number

W11454734

The transmission drives the agitator and spins the basket in the washer. Possible Repair Solution For: Not washing properly, will not agitate, pumps but will not spin.

★★★★★

★★★★★

1 Review

Fix Number

FIX12741641

Manufacturer Part Number

W11393685

This drum shaft assembly is for washers. Drum shaft assembly connects the spin basket to the drive motor to spin the basket. Unplug the washer before installing this part. Wear work gloves to protect your hands.

★★★★★

★★★★★

1 Review

Fix Number

FIX11747977

Manufacturer Part Number

WPW10006355

This shift actuator helps your washer switch between washing and spinning, and controls the agitator. It fits many Whirlpool and related brand models. If your washer isn’t spinning or agitating, this part may need replacing. Installation is simple with basic tools. Always disconnect power and water before starting. Sold as a single unit.

Fix Number

FIX10064562

Manufacturer Part Number

W10754448

This clutch component is essential for the proper operation of top-load washing machines, helping to activate the transmission during both the agitation and spin cycles. If your washer is struggling to agitate or spin, this part may be the culprit and should be inspected for wear or damage. Installation involves accessing the underside of the appliance, and you'll need a socket wrench and screwdriver to complete the replacement. The clutch is supplied with one securing screw and is designed to restore reliable performance to your washer, ensuring your laundry cycles run smoothly and efficiently.

★★★★★

★★★★★

1 Review

Fix Number

FIX16220910

Manufacturer Part Number

W11454372

This includes the Tub Seal

★★★★★

★★★★★

1 Review

Fix Number

FIX11723155

Manufacturer Part Number

W10820039

The purpose of this part is to help drive the outer spin basket in your washer during the spin cycle. If your washer is not spinning or agitating, you may need to replace the drive hubs. This genuine OEM kit includes a gear assembly, which sits on the transmission shaft, and a drive hub that attaches to the inner basket. There are two different styles of hub included, but only one is needed. The style you use depends on your washer. The basket hub is found under the agitator, so it will need to be removed from the washer in order to complete this repair. Before beginning, please be sure to disconnect the power supply to the washer.