Roper Washer Valves

★★★★★

★★★★★

2 Reviews

Fix Number

FIX334646

Manufacturer Part Number

285805

There are many symptoms that may indicate an issue with your water inlet valve. These can include your washer not filling with water, it will not stop filling, the washer is leaking, or it is both filling and draining at the same time. You can test if your valve is faulty two different ways. The first is to disconnect the power while the washer fills, if water continues to fill the tub, then the valve should be replaced. The second way is to use a multimeter to test for continuity on the valve solenoids. If you do need to replace the water inlet valve, this is a genuine OEM part that has two ports and is compatible with half-inch ID hose. Before beginning your repair, please be sure to disconnect the power and water supply to your washing machine.

★★★★★

★★★★★

1 Review

Fix Number

FIX12349267

Manufacturer Part Number

W11210459

If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the washer. If there is reduced water flow, first check if the screens on the valve are blocked with debris. A multimeter can be used to test if the valve is faulty or not. Please be sure to disconnect both the power and water supply to your washer before replacing the valve.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11749042

Manufacturer Part Number

WPW10144820

This part is used to help control and balance the water temperature flowing in to the washer tub.

★★★★★

★★★★★

1 Review

Fix Number

FIX11757114

Manufacturer Part Number

WPW10683603

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

Fix Number

FIX11742194

Manufacturer Part Number

WP3979346

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

Fix Number

FIX16875617

Manufacturer Part Number

W11641117

This water inlet valve controls the flow of hot and cold water into the washing machine. It’s a genuine OEM part that replaces older versions and helps restore proper water delivery. Check your appliance manual to confirm compatibility before installation.

Fix Number

FIX11746766

Manufacturer Part Number

WP8578341

Replace a faulty water inlet valve with this genuine OEM part to restore proper water flow and temperature control. It solves issues like slow filling, leaks, or a washer that won’t fill. Quick and simple to install for reliable washing performance.

Fix Number

FIX11748964

Manufacturer Part Number

WPW10140918

Fix Number

FIX11746765

Manufacturer Part Number

WP8578340

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. W/Bi-Metal

Fix Number

FIX11748391

Manufacturer Part Number

WPW10113122

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “warm” water. Another common term is water solenoid.