If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the washer. If there is reduced water flow, first check if the screens on the valve are blocked with debris. A multimeter can be used to test if the valve is faulty or not. Please be sure to disconnect both the power and water supply to your washer before replacing the valve.
If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the washer. If there is reduced water flow, first check if the screens on the valve are blocked with debris. A multimeter can be used to test if the valve is faulty or not. Please be sure to disconnect both the power and water supply to your washer before replacing the valve.
Be the first to ask our experts a question about this part!
