Roper Washer Hoses and Tubes

Washer Drain Hose The drain hose carries used water from the washer to your house drain.

Drain Hose It connects from the pump to the back panel. The clamp is not included.

Water Inlet Hose This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.

Washer Tub-to-Pump Hose The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands

Tub-to-Pump Hose Kit This kit comes with the clamps.

Drain Hose This drain hose is 42" long and includes the clamps.

Break Hose This hose goes from valve to inlet.

Inlet Hose - 5 FT This hose can handle hot or cold water and is five feet long.

HOSE-DRAIN

Drain Hose with Clamp Used to drain water.