Wall Oven Sensors

Fix Number

FIX10059162

Manufacturer Part Number

WB21X22134

If your oven is running hot, not heating evenly, not coming up to temperature, or just not heating up at all, there may be an issue with the temperature sensor. This sensor is usually found in the back of the oven or fitted onto the broil assembly, and is used to measure the temperature inside the cavity of the oven. It then sends that information back to the electronic control, which adjusts the temperature as necessary. If you need a new sensor, this is a genuine OEM replacement part. Before beginning the repair, be sure to disconnect the power supply to your oven, along with the gas if applicable.

★★★★★

★★★★★

1 Review

Fix Number

FIX11731754

Manufacturer Part Number

316233903

This is a genuine OEM replacement temperature sensor for your range. You may need to replace the sensor if there is little to no heat in the oven, the oven will not start, it is not heating evenly, or the oven is getting too hot. Before beginning this repair please be sure to disconnect the power supply to your range, as you will be working with electrical components. You will need access to the back panel of the range, so you will also need to pull it out from the wall so you can easily work. If you find that the connectors are different from the original part, you can cut and splice the wires together with porcelain wire nuts.

Fix Number

FIX820208

Manufacturer Part Number

316217002

This is a temperature sensor for a range. The sensor is what detects the temperature inside the oven and is often replaced when the oven is having heating issues. Please note that the wire connector may be different from the original; if this applies to your part, cut the quick connect and wire together with porcelain wire nuts. For this DIY repair, you will need a Number 2 Phillips or Number 2 square-head screwdriver and possibly wire strippers. Make sure to disconnect the power before installing this part. You will need to pull the range from the cabinet to gain access to this part from the back of the unit.

★★★★★

★★★★★

1 Review

Fix Number

FIX1570174

Manufacturer Part Number

12001656

This is a factory-certified oven sensor kit with two harness adapters. Its purpose is to sense the temperature inside the oven. Replacing this part can fix an oven that is not reaching the proper temperature (too hot or not hot enough), not heating evenly, or an oven that will not start. To access this part, you will need access to the back of the range. Use a Phillips screwdriver to remove the screws on the access panel. Once the access panel is removed, you will notice a hole on the right side of the oven where the temperature sensor comes out of the oven. You will need to unplug the wire harness, and then open the oven door, locate it in the upper left corner, and remove the screws holding the temperature sensor in place. Pull the sensor out of the back of the oven, and replace it with your new part.

Fix Number

FIX11748765

Manufacturer Part Number

WPW10131825

This temperature sensor detects the temperature within the oven cavity.

Fix Number

FIX236398

Manufacturer Part Number

WB23T10015

This temperature sensor detects the temperature within the oven cavity.

★★★★★

★★★★★

1 Review

Fix Number

FIX2003225

Manufacturer Part Number

12001655

This temperature sensor detects the temperature within the oven cavity.

Fix Number

FIX236043

Manufacturer Part Number

WB21X5301

This sensor detects the temperature within the oven cavity.

★★★★★

★★★★★

1 Review

Fix Number

FIX8754411

Manufacturer Part Number

WB21X10165

Fix Number

FIX1528543

Manufacturer Part Number

316490001

This temperature sensor detects the temperature within the oven cavity.