OEM Maytag Range Long Oven Sensor [12001656] | Ships Today | Fix.com
Long Oven Sensor – Part Number: 12001656
Long Oven Sensor – Part Number: 12001656 Long Oven Sensor – Part Number: 12001656 Long Oven Sensor – Part Number: 12001656 https://fixcom.azureedge.net/Schematics/Maytag/50261.gif

Long Oven Sensor

Your Price
$37.28

Fix Number: FIX1570174

Manufacturer #: 12001656

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.

Works with the following brands

Maytag, Jenn-Air, Magic Chef, Whirlpool, Amana, Admiral, Crosley, Norge, KitchenAid, Kenmore, Hardwick, Litton

Works with the following products

Range, Wall Oven, Microwave Oven Combo

Fixes the following symptoms

Little to no heat when baking | Oven is too hot | Will Not Start | Oven not heating evenly

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
Part Number: FIX2003225
This temperature sensor detects the temperature within the oven cavity.
$24.19
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 24 reviews
>
<
Customer:
Robert from San Diego, CA
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replace the oven temperature sensor
Located inside, Top Left of Oven. It facilitated the contortions of getting to it by removing the oven door 1st. Only 2 screws and the hinge plates (1 each side). Made access much easier. Otherwise just as found on your website, 2 screws and very simple to do. It also worked/fixed the oven as the troubleshooting information suggested.
5 of 6 people found these instructions helpful

Were these instructions helpful?   

Customer:
Hugh from Grand Rapids, MI
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Oven would not start but oven light was as well as the clock
To remove and replace the sensor, I had to remove the back panel of the range and use a pair of forceps to feed the plug through the hole so I could disconnect the old sensor and connect the new sensor. The connecting plug of the original part would not go through the small rectangular hole in the range. If you are going to do this yourself, find a pair of forceps or possibly needle nose pliers with teeth. It is not a terribly difficult repair but I sure am glad I had the forceps and my wife to assist me.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Rickey from Gretna, LA
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Control panel does not work for certain settings on the oven
After replacing the thermostat probe that was indicated in the symptoms chart, the panel still does not work. I guess it was worth the $39.00 to try. Of course now I have to order the panel with an average cost of $220.00.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Kenneth from Beaufort, SC
Parts Used:
  • Long Oven Sensor
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Had fc error code (over-heated)
Instructions and video were excellent. In my double oven, when pulling out the probe wire/harness it was caught behind the oven. Subsequently when pulling the harness plud came off. Extra step, pulling oven out, the other sensor, was caught too so while out positioned so if need be can pull out. Works GREAT...
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
David from Milledgeville, GA
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
F3 error when turning oven on
Removed two screws inside (upper left) oven that held oven sensor inplace; pulled sensor cable out to connector; unplugged sensor and plugged new sensor pushed cable back in and screwed the two screws back in. Easy and quick.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Stephen from Strawberry Plains, TN
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
F1 error code would appear within minutes of starting oven. Oven would stop heating
Very simple. Remove the covering from the back of the range. Take out two screws holding the oven sensor inside of the oven. Remove the old sensor, put in the new and re-install the screws. The new part did not fix the problem but, it was a simple, cheap first attempt.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Michael from Pearl River, NY
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven did not heat up
Removed the oven door, removed existing screws. Pulled wire carefully out of opening, unclip connection. Reattached connection screwed back new sensor attached oven door finished.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Harold from Newport, TN
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Oven would not preheat had to keep playing with diagatel read out temp.
I called & and talked to rep.he was very polite & helpful . My problem was trying to do the repairs on too old of a stove that parts was no longer avalible. But I want to thank you for trying this site is a good company to contact for parts & repair help ! Again Thanks !
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
linda from Raleigh, NC
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The oven was always humming and when I turn on the oven it gives me f#
I told my son, "when the parts come, you will know what parts to replace". And he did. He opened the oven, removed that long sensor part and replaced it with the new one. The humming stopped immediately and I baked in the oven as soon as he pushed back the range in its place.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
William from Steubenville, OH
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven and boiler would not heat up over 100 degrees
after installing sensor oven worked for half a day then stoped heating creating the same problems.I turned braker off before removing screws insde oven from sensor then removed back off oven unpluged sensor and pulled sensor out from inside of oven pushed new sensor wire in from inside of oven pulled wire throug from back of oven then put screws in from inside of oven to hold sensor in pluged wirein back put back cover on and turned braker back
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Lary from Citrus Heights, CA
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Oven getting too hot, not staying at set temp
There is a video for this repair on the web site.I replaced the long temp sensor in the upper left corner inside the oven. Turn off breaker for the stove, take out shelves and lift off the door. Sensor is held by two screws. Remove them and gently pull out the wire. There is insulation and you have to fiddle a little with it to get the connecting plug through. Unplug the old, plug the new, and fiddle it back in through the insulation. Screw it back in and you're good to go. The sensor comes with an adapter for the connector if your original is different. Did not need for mine. Our oven works fine now. Saved $$, and time.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
jason from mason city, IA
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
The oven would shut down
A nd there was no number to find the issue. The bake light would blink and the oven wouldn't work. I tried changing the High Control first and after that didn't work I changed the short stick sensor.The repair is really simple and would have been cheaper if I would have just went for the short stick sensor instead of the High Control but I can't be sure both did not need to be changed. If you have this issue I would suggest just purchasing the short stick sensor and seeing if that works first. The repair is simple.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
James from Marianna, FL
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Fan would not stop running and oven door would not open
took the two screws out pull the wire until the plug came out pull a part put the new one on push the new one in
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
michael from HOAGLAND, IN
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Bottom element would not heat.
This did not fix my problem. Took out 2 screws from right hand corner. Pulled wire through hole. Uncliped harness, then did everything in reverse.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Joan from Menomonee Falls, WI
Parts Used:
  • Long Oven Sensor
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Touch pad bake would not work and temp would get too hot
Repair was easy, but the bake button is still not responding instantly. The temp is 25 degrees lower than set temp. I should be able to correct this.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

>
<

Model Cross Reference

This part works with the following models:

Fix Number: FIX1570174
Manufacturer Part Number: 12001656
Brand
Model Number
Description
Kenmore
22-.98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-.98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Magic Chef
3563XYA
Range
Magic Chef
3563XYW
Range
Magic Chef
3862VVV
Range
Magic Chef
3862XRA
Range
Magic Chef
3862XRW
Range
Magic Chef
3862XVA
Range
Magic Chef
3862XVW
Range
Magic Chef
3865XRA
Range
Magic Chef
3865XRW
Range
Magic Chef
3867VVD
Range
Magic Chef
3867VVV
Range
Magic Chef
3867XVB
Range
Magic Chef
3868KYW-D
Range - Electric
Magic Chef
3868SYA
Range
Magic Chef
3868SYW
Range
Magic Chef
3868VVD
Range
Magic Chef
3868VVV
Range
Magic Chef
3868XVA
Range
Magic Chef
3868XVB
Range
Magic Chef
3868XVW
Range
Magic Chef
3882VRV
Range
Magic Chef
3882VVV
Wall Oven
Magic Chef
3882XRA
Range
Magic Chef
3882XVA
Range
Magic Chef
3888VRA
Range - Freestanding, Electric
Magic Chef
3888VRV
Range - Freestanding, Electric
Magic Chef
3888VRV-Z
Range - Freestanding, Electric
Magic Chef
3888VVA
Range - Freestanding, Electric