Crosley Wall Oven Parts

Crosley Appliance Parts

Popular Crosley Wall Oven Parts

Fix Number
FIX971245
Manufacturer Part Number
4396923
This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it offers reliable performance and easy cleanup. Measuring approximately 16 3/4 inches long by 12 3/4 inches wide and 1 3/4 inches high, it provides a practical solution for everyday broiling and roasting.

Installation Instructions

darren from issaquah, WA
Failed Broil Element
Pull 2 screws from mounting bracket, Pull 2 wires, Re-install in reverse order. Note: Tested old element with continuity tester and it tested ok. So don't trust that to tell you if part is bad or not. Just replace it. Read more...
GLASS
$84.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11728351
Manufacturer Part Number
5304503232
This is also called the heat barrier glass.

Installation Instructions

Susan from Mount Ephraim, NJ
Broken inner pane of glass in oven door
We were able to take the door apart by removing the screws and lifting the inner part away, exposing the broken glass. Replaced the glass and put it all back together. There are several videos on You Tube available, but we didn't have to refer to them. Very successful! Read more...
LENS
$25.10
In Stock
Fix Number
FIX16218465
Manufacturer Part Number
5304524341
This is a light bulb lens, and it is made for your oven. This part protects the light bulb inside your oven by covering it. The lens is made of glass, and has a 3-inch diameter. Before making this repair, we recommend disconnecting the power.

Installation Instructions

Boyd from Birmingham, AL
Lens broken
Removed snap wire holding old lens in place, replaced bulb then centered new lens in place and put snap wire on new lens. Job done in 2 minutes. Easy as eating apple pie. Read more...
Radiant Surface Element
$116.15
In Stock
Fix Number
FIX2361362
Manufacturer Part Number
316135401
This part is the heatsource. This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Fix Number
FIX1573892
Manufacturer Part Number
12400035
If your gas oven isn’t lighting properly, this flat-style igniter kit might be the fix. It helps open the gas valve and ignite the burner for baking or broiling. It works with many ovens and replaces both short and long flat igniters—but not round ones. If your igniter glows but doesn’t light the burner, it’s probably too weak. The kit includes everything you need: the igniter, wires, bracket, and instructions. It’s about 3 ¾ inches long and easy to install with basic safety steps—just unplug the oven and turn off the gas. Sold individually.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Gas smell
  • See more...

Installation Instructions

David from ENCINITAS, CA
Wall oven would take a very long time to ignite.
One of the 2 screws that holds the igniter to the burner assembly was stripped and difficult to get out. Other than that it was an easy fix. Read more...
Fix Number
FIX471605
Manufacturer Part Number
5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...
Bake Element - 3400W
$160.40
In Stock
Fix Number
FIX1992188
Manufacturer Part Number
318254906
This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will not heat, or there is little to no heat when baking, you may need to replace the element. When replacing the element make sure to hold the wires forward so the wires do not fall back through the rear of the oven. This is a genuine OEM bake element. Please remember to disconnect the power to your range before you start your repair.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven not heating evenly
  • See more...
Fix Number
FIX11750972
Manufacturer Part Number
WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven not heating evenly
  • See more...
Range Bake Element
$50.36
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11757472
Manufacturer Part Number
WPY04000066
This bake element with push on wire terminals is located in ranges and ovens. The terminal depth is 3 inches, the total element length is 19 and the wire terminals are 16 inches wide. Detailed installation instructions are found in the manual provided by the manufacturer. If your element is not heating then replacing it can solve your problem.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...

Installation Instructions

GLENN from CHINO HILLS, CA
Bake element broke in half.
Disconnect electric.
Remove 2 screws.
Pull out old unit.
Disconnect wire connect tabs.
Install new unit.
Connect wire tabs.
Replace 2 screws
Read more...
Long Oven Sensor
$43.92
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX1570174
Manufacturer Part Number
12001656
This is a factory-certified oven sensor kit with two harness adapters. Its purpose is to sense the temperature inside the oven. Replacing this part can fix an oven that is not reaching the proper temperature (too hot or not hot enough), not heating evenly, or an oven that will not start. To access this part, you will need access to the back of the range. Use a Phillips screwdriver to remove the screws on the access panel. Once the access panel is removed, you will notice a hole on the right side of the oven where the temperature sensor comes out of the oven. You will need to unplug the wire harness, and then open the oven door, locate it in the upper left corner, and remove the screws holding the temperature sensor in place. Pull the sensor out of the back of the oven, and replace it with your new part.
Fixes these symptoms
  • Door won’t open after self cleaning cycle
  • Element will not heat
  • Little to no heat when baking
  • See more...

Installation Instructions

Michael from Pearl River, NY
Oven did not heat up
Removed the oven door, removed existing screws. Pulled wire carefully out of opening, unclip connection. Reattached connection screwed back new sensor attached oven door finished. Read more...

Crosley Wall Oven Appliance Types

Related Crosley Wall Oven Parts

Popular Crosley Wall Oven Models