Whirlpool Trash Compactor Parts

Whirlpool Appliance Parts

Popular Whirlpool Trash Compactor Parts

15 Inch Compactor Bags - 15 Pack
$26.44
In Stock
Fix Number
FIX1964579
Manufacturer Part Number
W10165295RP
These bags will fit most 15" rectangular compactors.
Touch-Up Paint - White
$8.00
In Stock
Fix Number
FIX385132
Manufacturer Part Number
72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Installation Instructions

Al from Cape Coral, FL
No heat when trying to dry clothes .
Followed instructions on your videos. Everything went as planned and the dryer works like new.... Read more...
Drive Gear Kit
$49.23
In Stock
Fix Number
FIX398589
Manufacturer Part Number
882699
This is a genuine OEM drive gear kit for your trash compactor. It includes the drive gear, pin spring, a retaining clip which is also known as a c-ring, ram stop, and the ram cam. The ram is used to compact the trash and if it is getting stuck, making excess noise, or is not stopping at the end of the cycle, then the drive gear may need to be replaced. Before beginning this repair, please be sure to disconnect the power supply to the trash compactor.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Drawer is hard to open and or close
  • See more...

Installation Instructions

John from RUTHERFORD, NJ
Trash compactor ram was not working.
Watched the video and followed the directions step by step. Read more...
Fix Number
FIX11747965
Manufacturer Part Number
WPW10001130
Sold Individually.

Installation Instructions

Margaret from McLeansville, NC
Washing Machine Out of Balance - Missing Leveling Feet
The was an extremely simple repair. Tilted the washer up, placed the nut on the level foot, inserted the leveling foot in the slot and voila! Done. Absolute easiest repair ever. Read more...
Drawer Roller
$16.40
In Stock
Fix Number
FIX11747573
Manufacturer Part Number
WP9871602
This is a genuine OEM replacement part. This bearing roller is commonly used in the assembly of trash compactors, it allows you to easily slide the container out of the appliance. If the drawer becomes challenging to open or close it could be an issue with the roller. There is one located on each side of the compactor, however these are sold individually. Before repairing your appliance disconnect it from the power source.
Fixes these symptoms

Installation Instructions

Ben from Howell, MI
Trash Compactor the drawer was very hard to open
In replacing the old partial rusted drawer slides had rusted screw with nuts that spun had to drill them out and replaced front larger bolt and nut the rear screw used a larger sheet metal screw. The wheels and bearing with on easy the instructions showed a modification to remove a tab for the different wheel assembly and installed just like the instructions. When done the drawer will slide out with just touch of your foot on open tab GREAT!! I was looking at buying a new compactor the repair saved me about 700 $. Thanks a lot. Never had a trash Compactor before this great and it keeps my puppy out of trash. Read more...
Spray Paint - 12 oz. - White
$22.68
In Stock
Fix Number
FIX347819
Manufacturer Part Number
350930
SWITCH-OFF
$180.39
In Stock
Fix Number
FIX11723073
Manufacturer Part Number
W10813586
This is an OEM part sourced directly from the manufacturer. This switch is used to control whether the compactor is on or off, it determines if there is power flowing through the machine or not. You may have a problem with your switch if your compactor will not stop at the end of the compacting cycle, or if your compactor will not stay long enough to go through a compacting cycle. Before attempting this repair you will need to unplug your appliance.
Fixes these symptoms
  • Doesn’t stop at end of compacting cycle
  • Won’t start
  • See more...
Rotary Switch Kit
$153.92
In Stock
Fix Number
FIX382679
Manufacturer Part Number
675382
This kit comes with an on-off rotary switch and two chrome knobs.
Fixes these symptoms
  • Doesn’t stop at end of compacting cycle
  • Won’t start
  • Won’t stay on
  • See more...

Installation Instructions

Kenneth from New Tazewell, TN
Quit after 38 years. Suggested a switch (s) failure
Removed two screws on front panel which allowed panel to become easily reachable. Replacement of rotary switch kit very simple. Did not replace sectional switch at this time. Back in operation. Read more...
Directional Switch
$64.14
In Stock
Fix Number
FIX11744742
Manufacturer Part Number
WP777811
This is an OEM part sourced directly from the manufacturer. This is a top limit and directional switch that is designed for use with trash compactors. This switch will interrupt the current that flows to the motor when the ram reaches the top of the compactor. When the ram reaches the top of the compactor this switch reverses the motor direction. You may have a problem with your switch if you compactor won?t stop running at the end of the cycle. Before you replace this part make sure you have unplugged your trash compactor.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Noisy
  • See more...

Installation Instructions

Chad from Moreno Valley, CA
Trash Compactor would not stop after cycle and would make a ton of noise
I had a couple of problems with my trash compactor, it was present in the home when we bought it. First it wouldn't turn on, the on/off switch was broken so I replaced the switch and knob assembly. Then the unit would run through a cycle and wouldn't stop at the end and would make a loud banging noise. My directional switch was the suspect at first because it was in bad shape to begin with, looked like it had gotten stuck at some point and bent the arm. I replaced the directional switch and it didn't help. Then I realized that the on/off/start panel showed that the start button was stuck in the on position. This was delivering constant current and wouldn't allow the unit to stop. DON'T spend $150 for a new start/on/off panel. I took the panel off and separated the front from the back to expose the buttons from the inside. The start button was stuck so I took the parts out and reassembled them, they're all little plastic and metal pieces that interlink. After I reassembled the buttons' insides I reassembled the panel and reinstalled it. The unit works fine now. Read more...
Fix Number
FIX1964577
Manufacturer Part Number
W10165294RB
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.

Installation Instructions

James from Warwick, NY
Ran out of compactor bags
I put in a new bag. Honestly guys, filling out this questionnaire took more time than replacing a bag, something we do every week. I know that you mean well, but perhaps you should try to differentiate between disposable items and true repair parts. Read more...

Appliance Type

Related Pages

Popular Whirlpool Trash Compactor Models