Whirlpool Trash Compactor Hardware

Fix Number

FIX398589

Manufacturer Part Number

882699

This is a genuine OEM drive gear kit for your trash compactor. It includes the drive gear, pin spring, a retaining clip which is also known as a c-ring, ram stop, and the ram cam. The ram is used to compact the trash and if it is getting stuck, making excess noise, or is not stopping at the end of the cycle, then the drive gear may need to be replaced. Before beginning this repair, please be sure to disconnect the power supply to the trash compactor.

Fix Number

FIX11746840

Manufacturer Part Number

WP90767

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.

Fix Number

FIX11746832

Manufacturer Part Number

WP90296

Sold Individually.

Fix Number

FIX12349731

Manufacturer Part Number

W11233072

This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed to be driven directly into sheet metal or plastic. It measures to be less than 0.5 inches long, and requires a Phillips head screwdriver.

Fix Number

FIX11740645

Manufacturer Part Number

WP302868

Sold Individually.

Fix Number

FIX11740982

Manufacturer Part Number

WP3196175

This is an OEM part sourced directly from the manufacturer. This self-tapping screw is commonly used in kitchen appliances, such as trash compactors and ranges. The uses vary depending on appliance type, therefore we recommend you refer to model specific diagrams for appropriate applications. This replacement screw is made of metal, and it is 8-18 x 3/8? in size. This screw is sold individually.

Fix Number

FIX11742731

Manufacturer Part Number

WP489069

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Fix Number

FIX11744747

Manufacturer Part Number

WP780263

This is an authentic OEM replacement part. This shoulder screw is commonly used in the assembly of trash compactors. Most often is it found at the base of the container, which holds the trash that is being compacted. We recommend you refer to model specific diagrams for appropriate uses and applications. This screw is made of metal, and it is 8-31 x 3/8? in size. This replacement screw is sold individually. Before repairing your trash compactor make sure you unplug it.

Fix Number

FIX11742754

Manufacturer Part Number

WP489478

Sold individually.

Fix Number

FIX11744731

Manufacturer Part Number

WP776356

This is a genuine OEM replacement part. This replacement nut is commonly used in the assembly of trash compactors. This nut is the roller wheel lock nut, it is what hold the wheel in place at the bottom of the frame. To install the nut you will need a wrench, you simply need to thread the nut onto the roller wheel shaft. This nut is made of metal, and it is sold individually.