Maytag Refrigerator Parts

Maytag Appliance Parts

Popular Maytag Refrigerator Parts

★★★★★
★★★★★
1 Review
Fix Number
FIX734935
Manufacturer Part Number
240534901
This is a genuine door shelf retaining bar for a refrigerator. It attaches to the inside of the door on the refrigerator and helps to secure items placed on the shelf. It is made of white plastic and can be easily installed without the use of tools. Start by making sure the projection on the inner door panel fits into the recessed area at the top of the shelf retainer bar. Once they are lined up, press it into place until you hear a snap. This part measures approximately 25-inches wide, 3-inches high, and 5-inches deep. If it breaks, cracks or warps over time, it will need to be replaced. This part is sold as an individual part. We recommend taking this opportunity to inspect the other shelf retaining bars for damage in case they also need to be replaced at the same time.
Fixes these symptoms

Installation Instructions

Kathleen from Parsippany, NJ
Needed to replace a broken bottom door shelf retainer bar on our older fridge.
I took the shelf retainer bar out of the shipping box, looked at the middle shelf to see how the bar sits on the brackets, and put it on. Took about 2 minutes. No tools needed. Done! Easy peasy! Read more...
Refrigerator Ice and Water Filter
$85.91
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11701542
Manufacturer Part Number
EDR1RXD1
Transform your daily hydration routine with the EDR1RXD1 water filter. It delivers pure, refreshing water for your family, enhancing the taste of your drinks and meals. Quick to install and long-lasting, it's the perfect addition to a busy, health-conscious lifestyle.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Marilyn from Darrouzett, TX
Filter needed to be replaced
I opened the small door and observed how the arrows lined up on the bottom of the one in the slot. I pulled the cylinder our and placed the new one with the arrows pointing the same way and pushed it in and closed the small door. Then pushed the reset button until the green light came back. Be sure to take the coverings off the two openings! Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX430917
Manufacturer Part Number
240530701
The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.
Fixes these symptoms

Installation Instructions

Christine from Torrington, CT
Shattered glass shelf, broken shelf on door and broken track for deli drawer
Just put the parts where they belong Read more...
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11739122
Manufacturer Part Number
WP2188664
This clear convertible meat drawer is for the lower part of the refrigerator. It has an air duct that allows cold air to flow into the drawer from the freezer. It can be used to store meats and vegetables to help preserve them for longer. If the food that is kept inside it is going bad quicker than usual, it could be in need of a replacement. If the drawer is not moving in and out smoothly, check to make sure the tracks that it slides on are in good condition. If they are, the drawer itself may be damaged. Usually damage is visible, so do a quick inspection for cracks or warping. This part is sold separately and measures roughly 16 7/16 inches wide, 14 5/16 inches deep, 1 5/8 inches high, and like all the parts we sell, is OEM approved. Keep in mind that your refrigerator has multiple options for meat and vegetables drawers, so be sure to check your user manual to ensure you are ordering the one you need.
Fixes these symptoms

Installation Instructions

Peter from Fernandina Beach, FL
cracked crisper
installing a crisper container in the refridgerator Read more...
Refrigerator Door Shelf Bin - White
$43.92
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11739091
Manufacturer Part Number
WP2187172
This door bin is sold individually. Its dimensions are 18 inches wide, 4.5 inches high, by 7 inches deep.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker not making ice
  • Leaking
  • See more...

Installation Instructions

Renee from FITCHBURG, MA
my door bin cracked and broke
lifted and removed old bin
replaced with new bin
Read more...
★★★★★
★★★★★
12 Reviews
Fix Number
FIX11738134
Manufacturer Part Number
W10874836
This pantry end cap kit is used to keep your refrigerator drawer from sliding all the way out. This kit includes both the right and left side end caps, and the pins which hold them in place. The manufacturer recommends replacing both sides at once, even if only one is broken, to ensure your drawer slides smoothly. This part is sold as a kit, unfortunately the manufacturer does not supply these parts for sale individually. If your end caps no longer hold the drawer in place, or if they have become visibly damaged, they need to be replaced. The dimensions are approximately 9 inches by 25 inches, and it is made of durable white plastic. For this repair, start by removing the 3 screws holding the end cap in place. Next, remove the pin and end cap and replace with the new one.
Fixes these symptoms
  • Clicking sound
  • Door won’t open or close
  • Fridge too cold
  • See more...

Installation Instructions

Warren R . from Ottumwa, IA
endcap drawer lid pin broken and pantry drawer lid clear window (plastic) cracked
Removed old pantry drawer /and plastic lid and glass shelf above as well as the two slide in drawers above(for work room) Used nut driver to remove (2) screws on right side holding drawer slide and (2) screws holdin endcap. carefully removed the piece and worked it loose. It is connected to another piece at the end, just angle it out. Switched the plastic slide piece from old to new and reinstalled side piece with nut driver. Plastic pantry drawer lid put on at this time. Open and close and check for fit My pantry drawer lid seems to catch a little right in the middle when opening. Read more...
★★★★★
★★★★★
11 Reviews
Fix Number
FIX11739119
Manufacturer Part Number
WP2188656
This is a genuine OEM replacement crisper drawer for refrigerators. It is sold as an individual part. The crisper drawer with humidity control allows you to adjust the humidity within the crisper, which can help preserve the quality of your produce. It attaches to the inner part of the refrigerator to the bottom of the crisper shelf. If your crisper drawer is missing, cracked, damaged, or discolored, it needs to be replaced. It is made of durable clear plastic with a white handle and is sold individually. No tools are needed for installation, simply slide the new crisper drawer into the tracks.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...

Installation Instructions

Ollie from Sayville, NC
Replace Crisper Drawer with Humidity Control
Pull refrigerator from wall to be able to open the door wide enough to slide old Crisper out and slide new one in. Push refrigerator back in place! Read more...
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11722130
Manufacturer Part Number
EDR4RXD1
This package contains one individual water filter that is NSF-certified, and OEM approved. To ensure that the filter is successfully removing contaminants, it will need to be replaced at least every 6 months or 200 gallons of water. This will ensure tasteless and odor-free water. It has approximate measurements of 2-1/2 inches deep, 1-1/2 inches wide, and 8 inches high. This is a simple installation. This filter is found on the interior of the refrigerator in a drop-down style housing. Pop out the old filter, slide the new filter in place and turn it until it clicks. Be careful not to over-tighten. Close the cover. Run your dispenser to activate the filter and clear out air bubbles. A loud air pressure sound is completely normal. Reset your water filter indicator if applicable.
Fixes these symptoms
  • Fridge too cold
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • See more...

Installation Instructions

Blaine from Huntley, IL
Needed new h2o filter
Used my hands only...no tools necessary Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11752778
Manufacturer Part Number
WPW10321304
This is a manufacturer-approved refrigerator door shelf bin, also sometimes referred to as the crisper bin. It is sold individually. It is made of clear plastic with a white plastic trim. It is used as a storage shelf for common refrigerator items, such as jars, bottles, cans, and condiments. When this part needs to be replaced it will be visually obvious. Over time, the plastic can sometimes crack or break due to the constant exposure to cold temperature and will need to be replaced. This is a very quick and easy repair that does not require any tools. You will simply lift up and out of place to remove, and slide the new bin onto the tabs, making sure it is level and secure before closing the refrigerator door.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Evelyn from Birmingham, AL
Changed water filter. No problem. It had never been changed. I had a cracked door bin that kept falling out.
Just turned off water supply. Popped the old filter out inserted the new one. Made sure it was secure. Turned the water supply back on. The self just snapped in place Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11757048
Manufacturer Part Number
WPW10671238
This part is the center crisper drawer slide rail which helps to support the crisper drawers in your refrigerator. If you have difficulty opening or closing your crispers, the center slide rail may be broken and needs to be replaced. Too much weight on the shelf above or in the crisper drawers may cause the center slide rail to break. Replacing this part is easy and does not require any tools. First remove any items off the crisper shelf along with the crisper drawers, then carefully remove the glass shelf. Once you can access the broken center slide rail, gently pull forward on the crisper shelf frame and pull the rail out. Take your new part and line up the locator tab at the rear of the rail, pull the crisper shelf forward, and drop the new rail into place. You can then replace the glass shelf and the crisper drawers, which should now easily slide in with the new rail installed. This is a genuine OEM part, made of white plastic and approximately 13.5 inches in length.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...

Installation Instructions

Ruthann from CHEVY CHASE, MD
center bracket broke
Just took the glass out of the shelf above the crisper drawers, snapped the new bracket in place, and replaced the drawers. Nothing to it. Read more...

Maytag Refrigerator Appliance Types

Related Maytag Refrigerator Parts

Popular Maytag Refrigerator Models