Maytag Refrigerator Hardware

Maytag Appliance Parts

Popular Maytag Refrigerator Hardware

Retaining Ring
$7.88
In Stock
Fix Number
FIX11746909
Manufacturer Part Number
WP9703438
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or will not tumble at all. The retaining clip can also be used with stand mixers, to hold the pinion gear to the agitator shaft. This genuine OEM part is made entirely out of metal and measures approximately half an inch in diameter.
Fixes these symptoms
Screw
$12.73
In Stock
Fix Number
FIX11757021
Manufacturer Part Number
WPW10661886
This authentic OEM part is a mounting screw for the door handle on your refrigerator. If the door handle is loose or you are having issues opening or closing the door, a new mounting screw may solve these issues. Please note that the screw is sold individually, so if you need to replace more than one you will need to order the appropriate quantity.
Screw
$5.36
In Stock
Fix Number
FIX11743743
Manufacturer Part Number
WP681249
Sold individually.
Screw - 10-16 x 1
$7.95
In Stock
Fix Number
FIX11741409
Manufacturer Part Number
WP3387230
This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer manual. *Please note: this screw is sold separately.
Screw
$7.95
In Stock
Fix Number
FIX11742744
Manufacturer Part Number
WP489357
Sold individually.
Screw
$13.38
In Stock
Fix Number
FIX11742758
Manufacturer Part Number
WP489497
Sold individually.
Hose Clamp
$8.04
In Stock
Fix Number
FIX11743008
Manufacturer Part Number
WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Fixes these symptoms
Fix Number
FIX11739183
Manufacturer Part Number
WP2194719
This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer holds in the pivot points of the ice and water arms. If it breaks, the arms will be loose and can shake around. The top half springs the ice and water arms back into the original position, and if the retainer is broken, they will not be able to do this. The dispenser lever retainer is found behind the dispenser trim and can be removed with a ¼ inch nut driver. This part is sold individually and is an OEM part.
Fixes these symptoms
Screw, 8/18 x 3/8
$7.95
In Stock
Fix Number
FIX11746840
Manufacturer Part Number
WP90767
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
Screw
$13.46
In Stock
Fix Number
FIX11749498
Manufacturer Part Number
WPW10170540
Sold individually.

Related Parts