Kelvinator Refrigerator Parts

Kelvinator Appliance Parts

Popular Kelvinator Refrigerator Parts

★★★★★
★★★★★
1 Review
Fix Number
FIX734935
Manufacturer Part Number
240534901
This is a genuine door shelf retaining bar for a refrigerator. It attaches to the inside of the door on the refrigerator and helps to secure items placed on the shelf. It is made of white plastic and can be easily installed without the use of tools. Start by making sure the projection on the inner door panel fits into the recessed area at the top of the shelf retainer bar. Once they are lined up, press it into place until you hear a snap. This part measures approximately 25-inches wide, 3-inches high, and 5-inches deep. If it breaks, cracks or warps over time, it will need to be replaced. This part is sold as an individual part. We recommend taking this opportunity to inspect the other shelf retaining bars for damage in case they also need to be replaced at the same time.
Fixes these symptoms

Installation Instructions

Kathleen from Parsippany, NJ
Needed to replace a broken bottom door shelf retainer bar on our older fridge.
I took the shelf retainer bar out of the shipping box, looked at the middle shelf to see how the bar sits on the brackets, and put it on. Took about 2 minutes. No tools needed. Done! Easy peasy! Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX734936
Manufacturer Part Number
240534701
This middle shelf retainer bar attaches to the inside of the refrigerator door and helps to contain items on the shelf inside your appliance, like condiments and small containers. Its approximate size is 26 inches long, 3.5 inches tall, and made of white durable plastic. This part can start to wear or break over time, in which case it should be replaced. This is a beginner repair, that will not take any time at all. Start by removing the old part by pulling the tabs to release it. To install your new shelf, line it up with the shelf indents over the tabs, and gently press it down to lock in place. This is an OEM replacement part that is sold individually.
Fixes these symptoms

Installation Instructions

Gerard from Bayville, NY
door shelf retainer bar cracked in half
lifted each side of retainer bar off, slid new bar over moulded nubs on door, 123 done Read more...
Door Handle
$47.55
In Stock
Fix Number
FIX427922
Manufacturer Part Number
218428101
This handle works on both the fridge and freezer door, and if yours has become damaged it should be replaced. This is a genuine OEM replacement part, and is sold individually. If you need to replace both handles, please be sure to order the correct quantity. This is an easy repair that requires the use of a Phillips screwdriver. If the old handle is still attached to the door, remove the two screws (located at the top of the fridge door, or bottom of the freezer door) and then slide the opposite end off of the single screw. When attaching the new handle, do this in the opposite order. Slide the keyhole in the handle onto the individual screw on the door, then line up the other end of the handle and insert the two screws to secure the handle to the door.
Fixes these symptoms

Installation Instructions

Abraham from FLUSHING, NY
The original freezer handle 530-450-6469 had a sharp corner that could hurt one’s head upon coming up when reaching for a lower shelf in the refrigerator. I replaced it with door handle 218428101 which has a tapered end.
To take out the old handle, you simply take out the screws from the bottom and then you rotate the handle counterclockwise, and it released the top part of the handle from that screw hook. To put on the new handle I just did the reverse but since my new handle was not the official handle for the fridge, it did not fit the old screw holes but it did coincide with other screw holes that were plugged. I did not yet drill the screws into the new plugged area but just put on duct tape and it seems to be holding just fine. If I cared about the aesthetics, I would just drill the holes into the plugged screw holes. Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX430917
Manufacturer Part Number
240530701
The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.
Fixes these symptoms

Installation Instructions

Christine from Torrington, CT
Shattered glass shelf, broken shelf on door and broken track for deli drawer
Just put the parts where they belong Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX429854
Manufacturer Part Number
240337103
This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.
Fixes these symptoms

Installation Instructions

Rosemarie from Pioneer, CA
renter ruined the crisper drawers and the bottom shelf.
open refrigerator removed old cracked pieces, and cleaned glass self. installed new parts in place. Took less than 5 minutes and it is much better. Read more...
Fix Number
FIX450319
Manufacturer Part Number
5300158289
This motor runs the evaporator fan in your refrigerator. It is mounted on the center hub and has three lead wires terminals. This motor rotates in a clockwise fashion. Its shaft has a diameter of 1/8" and is 1-1/4" long.
Fixes these symptoms
  • Freezer section too warm
  • Fridge too warm
  • Noisy
  • See more...

Installation Instructions

Michael from Woodside, NY
Worn out motor was noisy
I watched the you tube video before ordering the part. The changeout is easy, but remove the plastic fan without breaking it, as one does not come with the kit. I took a few photos as I proceeded with the motor removal. The photos were useful later when reinstalling the parts. Don't forget to unplug the fridge. Read more...
Fix Number
FIX430916
Manufacturer Part Number
240530601
If you notice that opening and closing the meat pan drawer in your refrigerator has become difficult, there may be an issue with the support rails. Regular wear and tear, or excess weight on the shelf can cause damage to the rail. This genuine OEM part is specifically for the left side of the drawer support. If you need to replace the right-side rail, that part can be purchased separately. Replacing this part is simple, and just requires the use of a screwdriver. Remove all items from the shelf and drawer in your fridge, remove the entire shelf assembly and place on a solid work surface, then use the screwdriver to remove the old rail. Line up the new rail, and screw back onto the shelf frame. Test that the drawer slides in and out easily, place everything back into the fridge, and you are done!
Fixes these symptoms

Installation Instructions

Annemarie from Attleeoro, MA
Broken braket
Installt new ones. Read more...
Light Bulb
$19.73
In Stock
Fix Number
FIX12751166
Manufacturer Part Number
316538904
Clear, 120 Volt, 40 Watt.

Installation Instructions

Chris from Lillington, NC
Broken bake element & light bulb
Turned of the power at the fuse box as the oven was hard wired to the electrical source and then removed the old element via the screws at the back of the oven. Disconnected the wires from the element and then reconnected those to the new element. Screwed the element base to the back wall of the oven and then replaced the light bulb. Read more...
Fix Number
FIX429963
Manufacturer Part Number
240350608
This glass shelf sits above the crisper drawers in your refrigerator. This part is just the glass, there are no brackets or additional mounting hardware (these can be purchased separately if needed). Regular wear and tear or excess weight can cause damage to the shelf, and it should be replaced if damaged. No tools are required to do this, simply remove the old part and carefully place the new shelf glass down ensuring it is lined up properly with the shelf lip. This is a genuine OEM part that measures 23.82 inches by 15.50 inches.

Installation Instructions

Christine from Torrington, CT
Shattered glass shelf, broken shelf on door and broken track for deli drawer
Just put the parts where they belong Read more...
Refrigerator Ice Maker Assembly
$153.41
In Stock
★★★★★
★★★★★
5 Reviews
Fix Number
FIX12364147
Manufacturer Part Number
241798231
This is a genuine OEM ice maker assembly for your refrigerator. The ice maker makes eight cubes at a time, by filling the mold with water from the inlet valve, freezing the water until the cubes are formed, and then ejecting them into the storage bucket. This process will repeat until the ice bucket is full. If your device is not making ice cubes, the ice maker assembly may need to be replaced. Please ensure that you disconnect the power and water supply to your fridge before beginning this repair. This kit includes the fill cup, a four-pin wire harness adapter, and tube.
Fixes these symptoms
  • Clicking sound
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Benedict from Simsbury, CT
Ice maker stopped making ice
Loosened 2 screws on left side freezer wall. Disconnected wire harness. Took out ice maker. Made sure screws extended far enough out to fit the new ice maker over them. Connected the wire harness. Put ice maker onto the 2 screws. Tightened the screws. Within a few hours we had ice. NOTE: use a mirror or you will fish blindly trying to find and tighten the screws. With the mirror, it was easy. Read more...

Appliance Type

Related Pages

Popular Kelvinator Refrigerator Models