Kelvinator Refrigerator Drawers and Glides

Kelvinator Appliance Parts
Shop By Part Type

Popular Kelvinator Refrigerator Drawers and Glides

In Stock
Drawer Support Rail - Right Side
Fix Number FIX430917
Manufacturer Part Number 240530701
The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.
Fixes these symptoms
In Stock
Refrigerator Crisper Pan
1 Review
Fix Number FIX429854
Manufacturer Part Number 240337103
This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.
Fixes these symptoms
In Stock
Drawer Support Rail - Left Side
Fix Number FIX430916
Manufacturer Part Number 240530601
If you notice that opening and closing the meat pan drawer in your refrigerator has become difficult, there may be an issue with the support rails. Regular wear and tear, or excess weight on the shelf can cause damage to the rail. This genuine OEM part is specifically for the left side of the drawer support. If you need to replace the right-side rail, that part can be purchased separately. Replacing this part is simple, and just requires the use of a screwdriver. Remove all items from the shelf and drawer in your fridge, remove the entire shelf assembly and place on a solid work surface, then use the screwdriver to remove the old rail. Line up the new rail, and screw back onto the shelf frame. Test that the drawer slides in and out easily, place everything back into the fridge, and you are done!
Fixes these symptoms
In Stock
Crisper Glass Shelf Insert
Fix Number FIX429963
Manufacturer Part Number 240350608
This glass shelf sits above the crisper drawers in your refrigerator. This part is just the glass, there are no brackets or additional mounting hardware (these can be purchased separately if needed). Regular wear and tear or excess weight can cause damage to the shelf, and it should be replaced if damaged. No tools are required to do this, simply remove the old part and carefully place the new shelf glass down ensuring it is lined up properly with the shelf lip. This is a genuine OEM part that measures 23.82 inches by 15.50 inches.
In Stock
Refrigerator Crisper Drawer Cover
Fix Number FIX2363600
Manufacturer Part Number 240364787
This is a genuine OEM replacement crisper drawer cover for your refrigerator. It measures approximately 27 inches by 20 inches and does not include the glass insert for the self. You can reuse the glass from your current drawer cover or purchase it separately if required. This piece sits above the two side-by-side crisper drawers and is made of white plastic.
Fixes these symptoms
In Stock
Meat Pan
Fix Number FIX1526037
Manufacturer Part Number 240530811
This is the replacement meat pan for your refrigerator. It is made of clear plastic and is approximately 18 inches long and 13 inches wide. The meat pan slides into the bottom of the refrigerator shelf and is used to store meat and other food items. The main reason to replace the meat pan is if yours is cracked, damaged, or missing. To replace the meat pan, simply slide the old pan out, and slide the new one into place. This part is an OEM part sourced directly from the manufacturer, and is sold individually.
Special Order
Crisper Drawer Cover Support
Fix Number FIX461210
Manufacturer Part Number 5303288973
This is the replacement crisper drawer cover support for your refrigerator. The crisper shelf rests on the support, which keeps it level. If your drawer cover or shelf will not stay level, or will not stay in place, the support may be damaged. The support is held in place on the refrigerator wall with a drive pin. To remove the damaged support, simply drive the pin all the way in, and use a putty knife to pry the support from the refrigerator wall. At this point, pull the drive pin out and replace the old support with the new one. This is an OEM part and is sold individually.
In Stock
Crisper Pan - Front NOT Included
Fix Number FIX447396
Manufacturer Part Number 3206180
The crisper pan allows you to store fruit & vegetables in your refrigerator.
Special Order
Crisper Pan Cover
Fix Number FIX427588
Manufacturer Part Number 218314101
Crisper Drawer Cover Support Bar
Fix Number FIX454704
Manufacturer Part Number 5303205987

Related Parts