Hotpoint Refrigerator Hardware

Hotpoint Appliance Parts

Popular Hotpoint Refrigerator Hardware

Fix Number
FIX963756
Manufacturer Part Number
WR02X12008
The evaporator fan grommet is used to provide a cushion between the fan motor and the motor mounting bracket in your freezer. This genuine OEM part is about one inch in diameter and is red in color. It is part of the motor assembly found behind the evaporator fan cover at the back of your freezer. If the fan has become quite noisy, it may be time to replace the grommet. To complete this repair, you will need to remove everything from the freezer including the ice tray, the fan cover, freezer floor, evaporator cover, and the fan motor assembly. The tools you will need for this job include a pair of needle nose pliers, a Philips screwdriver and a small flat blade screwdriver, along with a 1/4-inch and a 5/16-inch nut driver. Please ensure that you disconnect the power supply to your fridge before you begin this repair.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge too warm
  • See more...
Fix Number
FIX284555
Manufacturer Part Number
WR02X10098
This grommet is found on both the front and back of the fan motor assembly for the condenser and the evaporator in your fridge. It is used to provide a buffer between the fan motor and the mounting bracket, which helps to reduce noise. You may need to replace the grommets if you are getting excessive noise from either the condenser or evaporator fan motors, you may need to replace one or more grommets. This is an authentic OEM part, made of black plastic and measuring approximately 1 inch in diameter. They are sold individually, so if you need to replace more than one grommet be sure to order the correct quantity.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge too warm
  • See more...
Lid Bumper
$10.97
In Stock
Fix Number
FIX284979
Manufacturer Part Number
WR02X10540
This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor from scraping against the side bracket in the evaporator fan motor assembly. You can find the bumper behind the evaporator fan cover in the freezer. If your fridge or freezer is noisy, it is likely that the bumper has worn down and will need to be replaced.
Fixes these symptoms
Compression Ring
$9.88
In Stock
Fix Number
FIX1015726
Manufacturer Part Number
WR02X12149
This OEM compression ring is used to hold the evaporator fan motor in place. Signs that you may need to replace the compression ring are if the fan is noisy, or your fridge or freezer are too warm. We recommend replacing both the compression ring and the evaporator fan grommet at the same time. The evaporator fan motor is found at the back of the freezer compartment, and you will need a Phillips screwdriver to remove the cover concealing the fan. A small flat blade screwdriver may be needed to remove the compression ring from the fan. Please be sure to disconnect the power supply to your fridge before beginning this repair.
Fixes these symptoms
  • Freezer section too warm
  • Fridge too warm
  • Noisy
  • See more...
SCR 8-19 HI/LO TRP 1 S
$8.06
In Stock
Fix Number
FIX963198
Manufacturer Part Number
WR01X10448
Push On Nut
$13.83
In Stock
Fix Number
FIX298353
Manufacturer Part Number
WR2X7054
This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.
Fixes these symptoms
SCR 10-16 AB TRP 3/4 NBS
$16.87
In Stock
Fix Number
FIX10056090
Manufacturer Part Number
WR01X21151
Screw
$8.06
In Stock
Fix Number
FIX1020128
Manufacturer Part Number
WR01X10590
Sold Individually.
Evaporator Fan Grommet - Grey
$8.06
In Stock
Fix Number
FIX773826
Manufacturer Part Number
WR02X11331
This is a replacement evaporator fan grommet for your refrigerator. The fan grommet absorbs the vibration from the evaporator fan motor for quiet operation while it runs. If your evaporator fan is unusually noisy, it could be because the grommet is damaged. This grommet is made of grey plastic and is approximately one inch in diameter. To access the fan grommet and complete this repair, you will need to remove the evaporator fan motor assembly. This part is sold individually.
Fixes these symptoms
Set Screw
$13.10
In Stock
Fix Number
FIX963200
Manufacturer Part Number
WR01X10450
This is a replacement set screw for your refrigerator door. The set screw attaches the door handle to the stud on the refrigerator door. The screw is approximately ¼ of an inch in length and unlike some other screws, it does not have a screw head. It is made of stainless steel and is sold individually. This is an OEM part sourced directly from the manufacturer.

Related Parts