Official General Electric Refrigerator Hardware

Evaporator Fan Grommet - Red

$13.20

Fix Number: FIX963756
Manufacturer Part Number: WR02X12008

The evaporator fan grommet is used to provide a cushion between the fan motor and the motor mounting bracket in your freezer. This genuine OEM part is about one inch in diameter and is red in color. It is part of the motor assembly found behind the evaporator fan cover at the back of your freezer. If the fan has become quite noisy, it may be time to replace the grommet. To complete this repair, you will need to remove everything from the freezer including the ice tray, the fan cover, freezer floor, evaporator cover, and the fan motor assembly. The tools you will need for this job include a pair of needle nose pliers, a Philips screwdriver and a small flat blade screwdriver, along with a 1/4-inch and a 5/16-inch nut driver. Please ensure that you disconnect the power supply to your fridge before you begin this repair.

Fixes these symptoms

Clicking sound
Freezer section too warm
Fridge too warm
See more...

Watch the install video

Evaporator/Condensor Fan Grommet

$11.58

Fix Number: FIX284555
Manufacturer Part Number: WR02X10098

This grommet is found on both the front and back of the fan motor assembly for the condenser and the evaporator in your fridge. It is used to provide a buffer between the fan motor and the mounting bracket, which helps to reduce noise. You may need to replace the grommets if you are getting excessive noise from either the condenser or evaporator fan motors, you may need to replace one or more grommets. This is an authentic OEM part, made of black plastic and measuring approximately 1 inch in diameter. They are sold individually, so if you need to replace more than one grommet be sure to order the correct quantity.

Fixes these symptoms

Clicking sound
Freezer section too warm
Fridge too warm
See more...

Door Handle Fastener

$13.11

Fix Number: FIX6447735
Manufacturer Part Number: WR01X11007

This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.

Fixes these symptoms

Door won’t open or close
See more...

Watch the install video

Lid Bumper

$10.96

Fix Number: FIX284979
Manufacturer Part Number: WR02X10540

This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor from scraping against the side bracket in the evaporator fan motor assembly. You can find the bumper behind the evaporator fan cover in the freezer. If your fridge or freezer is noisy, it is likely that the bumper has worn down and will need to be replaced.

Fixes these symptoms

Fridge too warm
Noisy
See more...

Screw - Kit of Four

$16.03

Fix Number: FIX12365992
Manufacturer Part Number: 5304515677

This screw is used to secure the handle to your refrigerator and comes in a pack of four. This genuinely sourced part can be loosened and tightened with a Phillips-head or square-head screwdriver. With the door handle being constantly used, these screws can loosen over time and may eventually wear out, causing the handle to become loose or completely come off. This simple repair should only take a few minutes to complete.

Screw

$5.41

Fix Number: FIX11743743
Manufacturer Part Number: WP681249

Sold individually.

Mounting Screw

$13.77

Fix Number: FIX6011723
Manufacturer Part Number: WR01X11014

This door mounting screw is a genuine OEM part for your appliances. This screw is used to attach the door handles to their studs. If the door handle is loose or falling off, you may need to replace the mounting screw.

Fixes these symptoms

Door won’t open or close
See more...

Watch the install video

Compression Ring

$9.87

Fix Number: FIX1015726
Manufacturer Part Number: WR02X12149

This OEM compression ring is used to hold the evaporator fan motor in place. Signs that you may need to replace the compression ring are if the fan is noisy, or your fridge or freezer are too warm. We recommend replacing both the compression ring and the evaporator fan grommet at the same time. The evaporator fan motor is found at the back of the freezer compartment, and you will need a Phillips screwdriver to remove the cover concealing the fan. A small flat blade screwdriver may be needed to remove the compression ring from the fan. Please be sure to disconnect the power supply to your fridge before beginning this repair.

Fixes these symptoms