Roper Range Switches

★★★★★

★★★★★

1 Review

Fix Number

FIX11740783

Manufacturer Part Number

WP3149400

If the large surface burner on your range will not heat up, you may need to replace the switch. This genuine OEM switch is used to control the temperature of the large 8-inch burner, along with turning it on and off. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. When replacing the switch, the electrical harness features slip-on terminals for easy installation and connections to the switch. You should examine the terminals for signs of arcing or corrosion. If these signs are present, the terminals will need to be replaced as well. The shaft for the burner knob may be longer than the switch you just removed, but you will be able to remove the excess length by using a pair of pliers. If you also need to replace the knob used to turn the switch, it can be purchased separately.

Fix Number

FIX11740785

Manufacturer Part Number

WP3149404

This OEM surface element control switch regulates heat for 6-inch electric burners. It fits Whirlpool, KitchenAid, Maytag, and other compatible ranges. Common signs of failure include no heat, stuck on high, or poor temperature control. Disconnect power before installation. Sold as a single unit.

Fix Number

FIX11740775

Manufacturer Part Number

WP3148953

Designed for 8-inch surface burners, this infinite control switch lets you turn the burner on and adjust its heat level. It works by sending voltage to the heating element based on the knob setting. A common fix for burners that won’t heat or adjust properly, it’s compatible with several models and should be installed with the power off and proper safety steps followed.

Fix Number

FIX11723153

Manufacturer Part Number

W10820036

This lid or door switch kit helps ensure your washer or dryer only runs when the door is properly closed. It’s a safety feature that prevents spills and keeps your appliance working as it should. The kit fits many models and includes the parts needed for installation. Measuring roughly 2.5 by 1 by 1 inches, it’s easy to install with basic tools and blends into the appliance’s design.

Fix Number

FIX11740774

Manufacturer Part Number

WP3148952

This part carries 5.2-6.6 amps.

Fix Number

FIX16216966

Manufacturer Part Number

WB21X36771

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Fix Number

FIX11747359

Manufacturer Part Number

WP9762215

This 15-amp, 240-volt oven temperature switch controls cooking modes like bake, broil, and convection. It helps regulate heat and restore proper oven function when issues like no heat, uneven cooking, or startup failure occur. The switch does not include the control knob. Installation involves replacing the faulty unit behind the control panel.

Fix Number

FIX12070192

Manufacturer Part Number

W10900107

Fix Number

FIX11742283

Manufacturer Part Number

WP4157180

This is a genuine OEM replacement part. This surface burner ignition switch is commonly used on ranges, wall ovens, cooktops, and microwave oven combos. When the gas burner valve is pressed this is the part that creates the spark needed to light the gas that heats the burner. If your ignitor is not creating a spark when the knob is activated, you might have an issue with your burner ignition switch. You will need a screwdriver to successfully replace this part. Before you begin repairs make sure your appliance has been unplugged, and ensure the gas supply has been shutoff.

Fix Number

FIX11747119

Manufacturer Part Number

WP9750641

This switch controls the stove top surface burner.