OEM Roper Range Parts | Expert DIY Repair Help & Fast Shipping | Fix.com

Popular Roper Range Parts

$4.16
Drip Bowl - 6 Inch
(1)
Fix Number FIX11750108
Manufacturer Part Number WPW10196406
This Drip Bowl is an OEM approved replacement part designed for use with various models electric ranges and cooktops manufactured by Whirlpool, Amana, Magic Chef, Maytag, Roper, Caloric, Crosley, Admiral, Hardwick, Norge, Litton, Kenmore, KitchenAid, Hoover, Jenn-Air, Inglis, Estate, and Glenwood. For full compatibility, please see the "Model Cross Reference List" below. This Drip bowl fits under 6" burner elements, and has a diameter of approximately 8". While the replacement may be visually different from the original, it will fit your appliance. If your Drip Bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. Each Drip Bowl is sold individually, and may also be referred to as a Drip Pan. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms
Element will not heat


Installation Instructions
Henry from St Louis, MO says,

Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements....read more

$6.12
Light Bulb - 40W
Fix Number FIX884734
Manufacturer Part Number 8009
This replacement light bulb is sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Helen from Quincy, MA says,

lightbulb in refrigerator went out
Removed plastic shield on top of refrigerator. Removed old bulb.. Replaced new bulb. Reinstalled plastic shield. Voila!...read more

$5.45
Chrome Drip Bowl - 8 inch
Fix Number FIX11750107
Manufacturer Part Number WPW10196405
This Chrome Drip Bowl is an OEM approved replacement part sourced directly from the Whirlpool, and is intended for use with various models electric ranges and cooktops manufactured by Whirlpool, Amana, Magic Chef, Maytag, Roper, Caloric, Crosley, Admiral, Hardwick, Norge, Litton, Kenmore, KitchenAid, Hoover, Jenn-Air, Inglis, Estate, and Glenwood. For full compatibility, please see the "Model Cross Reference List" below. This Drip bowl fits under 8" burner elements, and has a diameter of approximately 10". While the replacement may be visually different from the original, it will fit your appliance. If your Drip Bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. Each Drip Bowl is sold individually, and may also be referred to as a Drip Pan. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms
Element will not heat


Installation Instructions
Henry from St Louis, MO says,

Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements....read more

$11.58
Drip Bowl - 8"
Fix Number FIX2366563
Manufacturer Part Number W10196405RW
This part is located beneath the element and catches any spills.
Fixes these symptoms
Element will not heat


Installation Instructions
chris from ABERDEEN, SD says,

Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behin...read more

$11.92
Surface Burner Plug-In Block Kit
Fix Number FIX340571
Manufacturer Part Number 330031
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Fixes these symptoms
Element will not heat


Installation Instructions
Doris from Skoke, IL says,

Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to sa...read more

$7.55
Drip Bowl - 6"
Fix Number FIX2366565
Manufacturer Part Number W10196406RW
This part has been substituted by the manufacturer and now has a hole in the center. This Drip Bowl is an OEM approved replacement part designed for use with various models of electric ranges and cooktops manufactured by Whirlpool, Amana, Magic Chef, Maytag, Roper, Caloric, Crosley, Admiral, Hardwick, Norge, Litton, Kenmore, KitchenAid, Hoover, Jenn-Air, Inglis, Estate, and Glenwood. For full compatibility, please see the "Model Cross Reference List" below. This Drip bowl fits under 6" burner elements, and has a diameter of approximately 8". While the replacement may be visually different from the original, it will fit your appliance. If your Drip Bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. Each Drip Bowl is sold individually, and may also be referred to as a Drip Pan. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms
Element will not heat


Installation Instructions
chris from ABERDEEN, SD says,

Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behin...read more

$26.67
Insulation
Fix Number FIX11750415
Manufacturer Part Number WPW10208653
Oven Wrap Insulation.
Fixes these symptoms
No Symptoms for this part
$21.15
Lid Switch
Fix Number FIX11723153
Manufacturer Part Number W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
Fixes these symptoms
Pumps but will not spin
Timer will not advance
Will not agitate

See more...
Installation Instructions
Lloyd from ESKO, MN says,

would not complete rinse cycle
Unplug power cord
lift and brace up top of washer. No need to remove whole top.
disconnect the two leads from old switch.
remove and discard metal clip from new switch.
replace ...read more

$61.51
Bake Element - 2600W 240V
Fix Number FIX11740695
Manufacturer Part Number WP308180
This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Oven is too hot

See more...
Installation Instructions
peter from potomac, MD says,

Bake element burnt out
1 Turned off power to stove at distribution box. 2 Removed oven racks to make room to work. 3 Illuminated oven interior. 4 Selected screw driver with largest grip, and correct phillips bit. 5 Undid tw...read more

$48.87
Oven Bake Element
Fix Number FIX11752501
Manufacturer Part Number WPW10308477
This bake element has push-on terminals and is found on the bottom of the oven. This bake element is located at the bottom of the oven to supply heat and it has push-on terminals. If your baking element is burnt out, the heat is not consistent, or is defective, then replacing the element could be a solution to your appliance problem. The tools needed for this replacement are: a screwdriver and needle-nose pliers. The first step in is to unplug the range or shut off the house circuit breaker before starting. Unscrew the black of the oven cavity to pull out wires from the defective element. Reconnect wires to the new element and screw it back on. Make sure the element is sitting flat.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Oven not heating evenly

See more...
Installation Instructions
john from midland, NC says,

THE OVEN WAS 10 DEGREES OFF,NOT REACHING PROPER TEMPRETURE.
THE PROBLEM I HAD COULD HAVE BEEN TWO THINGS.SO AT THE PRICE OF THE TWO THINGS WAS A GREAT PRICE.SO I INSTALLED THE TWO PARTS. PULL THE STOVE AWAY FROM THE WALL.MAKE SURE TO UNPLUG THE CORD FROM THE ...read more

Popular Roper Range Models