Models > FES310BW1

FES310BW1 Roper Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FES310BW1

Viewing 6 of 6

Manuals & Guides for FES310BW1

Click to download
Keep searches simple, eg. "belt" or "pump".
The bake element is found in the bottom of your oven, and is responsible for providing the heat for cooking. If your oven is not coming up to temperature, the temperature fluctuates, or it is not heat...
In Stock
The drip bowl is found underneath the burner element of ranges with a rolled terminal style plug-in surface element. The purpose of the bowl is to catch any drips or spills that may occur while cookin...
In Stock
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surf...
In Stock
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
In Stock
The manufacturer suggests replacing the receptacle at the same time.
In Stock
In Stock
$7.95
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much hea...
In Stock
This kit contains one clip, a screw, and a nut.
In Stock
This switch controls the stove top 6" surface burner.
In Stock
This broil element is found on the roof of the oven and has push-on terminals.
In Stock
The top of this part is now black.
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FES310BW1

Viewing 6 of 6
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Bradley from Lexington, OK
  • Parts Used:
    WP308180
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
lower back element stopped working
I got the model number and ordered a replacement element from partselect, was shipped quickly and I installed it in about 30 minutes, it now works great
469 of 559 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Richard from Pattonsburg, MO
  • Parts Used:
    WP308180
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Oven stopped heating.....
Removed the oven racks....

Removed the two screws holding element in place...

Disconnected spade lug connectors from old heating element.

Connected spade lug connectors to new heating element.

Reinstalled screws.....replaced oven racks....mission acomplished!
243 of 400 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Harry from Charlotte, NC
  • Parts Used:
    WP308180
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
The bake element stopped working.
First I cut off the power to the stove and double-checked to make sure no current was flowing to the unit. There were two screws attaching the bake element plate to the oven. I unscrewed the two screws and carefully pulled the bake element away from the oven exposing the contact wires. I carefully loosened the wire contacts from the bake element, slid the bake element off the contacts and then slid the new bake element onto the wire contacts. I gently clamped the contacts onto the bake element, pushed the wires back into the back of the oven and screwed back the bake element plate onto the interior of the oven. I turned on the power to test my work and I was done.
216 of 360 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!