Maytag/Maytag_Thumb/45157.gif
See part 24 in the diagram
( Grid squares measure 1x1 inch )

Surface Element Switch

Rated by 2 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$50.93
Fix Number: FIX12070192
Manufacturer #: W10900107
Manufactured by: Whirlpool

Product Description

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Howard from Carrollton, TX
  • Parts Used:
    W10900107
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Needed to replace a faulty burner switch
Removed the old switch by unplugging the electric connectors to the switch, removed the palnut, and took the old switch out. Placed the new switch in, reconnected the electric connectors. Mounted the new bracket, trimmed the shaft to fit, tightened the new palnut, selected the new dial adapter that was suitable, put the old dial back on, and it was done! Very easy. Anyone can do it.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Clyde from Benbrook, TX
  • Parts Used:
    W10900107
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
30+ year old cooktop! Physical problem, switch stem broke just above switch.
First, cutoff power at main circuit breaker box! Then,lifted burner cover & use a wooden stick to keep cooktop open while working. Take a little while (5+/- minutes) to determine which small parts would be used & put others aside. Removed four hex head screws with 1/4" socket wrench that secure heat control cover to inside pan. Removed two slotted screws holding burner switch to cover. With old switch as a guide, relocated electrical connectors (one by one) to new switch. Placed old rubber insulator on new switch and installed it back as insulator for burner cover plate with the two slotted screws, being careful to not prematurely break new stem off. CAUTION: Instructions supplied with new parts mention placing switch in the "UP" position. Look at picture provided with supplied instructions very carefully to ensure proper mounting. Once switch is placed in position and screws tightened. Select the appropriate length of stem by comparing it's length with the other three burner control switches. While holding link just below desired length with pliers, break the extra length off with a second pair of pliers. Select appropriate plastic/nylon bushing you have selected and slip it onto the stem, mindful of where the slotted side fits with the control knob. Replace four tie down screws to cover plate to secure it all. Lower the outside cover of cooktop. Be certain all burners are secure and pushed into their sockets. Clean up and throw breaker switch back on. Takes much less time than it did to write these instructions.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX12070192
Manufacturer Part Number: W10900107
Brand
Model Number
Description
Kenmore
1039567811
Range - Kenmore Range/Stove/Oven Model 103.9567811 (1039567811, 103 9567811) Parts
Kenmore
1066021101
Freezer
Hoover
1151AA-36
Cooktop
Hoover
1151AA-36G
Cooktop
Hoover
1151AD-36
Cooktop
Hoover
1151AH-30
Cooktop
Hoover
1151AH-36G
Cooktop
Hoover
1151AJ-30
Cooktop
Admiral
1151AL-30
Cooktop
Hoover
1151AL-36G
Cooktop
Hoover
1151WA-36
Cooktop
Hoover
1151WA-36G
Cooktop
Hoover
1151WD-36
Cooktop
Hoover
1151WH-30
Cooktop
Hoover
1151WH-36G
Cooktop
Hoover
1151WJ-30
Cooktop
Admiral
1151WL-30
Cooktop
Hoover
1151WL-36G
Cooktop
Roper
1352W06
Range - Gas
Roper
1353*0A
Range - GAS RANGE
Roper
1353*1A
Range - GAS RANGE
Roper
1353*2A
Range - GAS RANGE
Roper
1353*3A
Range - Range (gas)*
Roper
1353*4A
Range - Range (gas)*
Whirlpool
1353^0A
Range
Whirlpool
1353^1A
Range
Whirlpool
1353^2A
Range
Whirlpool
1353^3A
Range
Whirlpool
1353^4A
Range
Roper
1353W0A
Range - Freestanding, Gas