RCA Range Parts

RCA Appliance Parts

Popular RCA Range Parts

Broiler Pan - Large
$43.92
In Stock
Fix Number
FIX1517612
Manufacturer Part Number
WB48X10056
This is a broiler pan for your range. It catches drippings from the cookware, when broiling in the oven. This assembly includes the grill/grate and the bottom pan. These parts are made of porcelain. The grate is 15.5 inches wide, by 13 inches long. The pan is roughly 17 inches wide, by 13 inches long.
Drip Bowl - 6 Inch
$28.91
In Stock
Fix Number
FIX244364
Manufacturer Part Number
WB31M1
This is the drip bowl for your range or cooktop. The drip bowl sits beneath the burner of an electric range and collects any spills during cooking. The bowl is 6 inches in diameter and represents the smaller burner for your range. This product is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Surface Burner - 8 Inch - 2100W
$59.43
In Stock
Fix Number
FIX244014
Manufacturer Part Number
WB30X253
This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned on, it heats up to cook your food. If you turn on the burner and the element does not heat up, it will need to be replaced. To complete this repair, first be sure to disconnect the power from your range, and ensure the burner is cool to the touch. Then, gently remove the burner from the terminals and replace it with the new one. This part is sold individually, and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Drip Bowl - 8 Inch
$27.95
In Stock
Fix Number
FIX244696
Manufacturer Part Number
WB32X106
Drip bowls are designed to catch any spills or messes from cooking on your stove top. The bowls sit underneath the burner elements on your stove and can easily be removed for cleaning. If your drip bowls have become rusty, damaged, or are just filthy beyond cleaning, they should be replaced. This is a genuine OEM replacement drip bowl that fits under the 8-inch elements and is sold individually. Before replacing this part, please be sure that the element is turned off and cooled down completely. No tools are required to replace the bowls, simply pull out the burner element, remove the old drip bowl, line up the holes on the new bowl, and reinstall the burner element into the terminal.
Fixes these symptoms

Installation Instructions

Catherine from West Warwick, RI
I have a 24" Hotpoint range that needed drip bowls badly.
I had gone to local hardware stores to pick up replacement drip bowls. They specifically stated they were for Hotpoint electric plug-ins, but I was back and forth to the stores trying to find the ones that would fit. I finally ordered through this site. Got them in just a couple of days, and they fit like a charm. It's what I'll do next time to save myself a lot of trouble! Read more...
Surface Burner - 8 Inch - 2600W
$34.27
In Stock
Fix Number
FIX11743367
Manufacturer Part Number
WP660533
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
Fixes these symptoms

Installation Instructions

sharen from Virgini Beach, VA
surface elements were not working
Just inserted the surface elements into the top of the stove and they heated up and it is working fine. Read more...
Fix Number
FIX232606
Manufacturer Part Number
WB17X210
This kit comes with the terminal block, mounting clip and wires.
Fixes these symptoms

Installation Instructions

Winifred from Delray Beach, FL
Terminal block broke
Lift top remove old part cut wire splice and install Read more...
Range Infinite Heat Switch Kit
$54.12
In Stock
Fix Number
FIX16216966
Manufacturer Part Number
WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
Fixes these symptoms

Installation Instructions

Horace P. from Bainbridge Island, WA
One electric elements didn't work at all & the other one was on high setting even on low.
Went on line and down loaded instructions. Turned power off at junction box & also unplugged range from wall. Removed non-functioning infinite switch (2) and used serial # to order proper switches. The range was so old (33 yrs) I could find model # that would match. Switches arrived in 3 days, installed and working great. The only negative is, the wife isn't getting a new range. Read more...
Fix Number
FIX231612
Manufacturer Part Number
WB14X104
This hinge is located on each side of the oven door.
Fixes these symptoms
  • Door won’t close
  • Door won’t open after self cleaning cycle
  • See more...

Installation Instructions

Roger from North Port, FL
roller broke on hinge
pull oven door up of hinge.remove hinge an replace, Read more...
Oven Sensor
$153.73
In Stock
Fix Number
FIX236043
Manufacturer Part Number
WB21X5301
This sensor detects the temperature within the oven cavity.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...

Installation Instructions

Timothy from Gurnee, IL
F2 Error - Temp Probe Failed
Watched a U-Tube video and it went just like the video. Clear stove of racks etc. Move stove away from wall, unplug electric, remove access cover on back of stove. Remove old probe. Snap together fitting did not match. Slip new probe wires through insulated access hole. Clip and strip all wires. Wire nut probe wires to range wires with insulated nuts provided. Replace access cover. Slide stove back. The fix went fast. Moving the stove and getting in and out from behind it and cleaning under it (the floor and back/side walls since no one ever moves it to clean there) took far longer than replacing the probe. Read more...
Bake Element
$65.95
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX249247
Manufacturer Part Number
WB44K5012
This is a genuine OEM part is a partially open-style bake element for your oven, and comes with 1/4-inch push-on terminals. The bake element is found in the bottom of your oven, and it is responsible for providing the heat to cook your food. If your oven is not heating up, or has inconsistent temperatures, it may be time to replace the element. You can test the element with a multimeter to see if it is faulty. Please be sure to turn off the power to your range before beginning this repair.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...

Installation Instructions

Bill from Aiken, SC
Bottom Oven Element Burned Out
Per the video. Removed element with no problem. Sliding element back was a little hard but it went back in and element works. Thanks a lot. Bill Read more...

RCA Range Appliance Types

Popular RCA Range Models