Jenn-Air Range Valves

X-Large Burner Head with Electrode This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.

Large Burner Head

★★★★★

★★★★★

(1)

This part includes the spark igniter.

Burner Head with Electrode - Small

Burner Cap - Left and Right Front This burner cap sits on top of the burner base. Sold individually.

Rear Burner This black burner head has a glossy finish.

Burner Cap - Right Rear This burner cap sits on top of the burner base. Sold individually.

LP Orifice This LP orifice is for the bake and broil, 17K & 11K. The LP orifice helps control the gas that comes out of the burner tubes.

Natural Gas to Liquid Propane Conversion Kit This Conversion Kit is designed for use with various Ranges and Cooktops manufactured by Whirlpool, Jenn-Air, and Maytag. To ensure this is compatible with your appliance, please see the "Model Cross Reference List" below. This Kit contains the four orifices needed for converting your natural gas range to liquid propane. Each orifice is approximately 0.75" long. Please note, to convert back to natural gas, you must save the old orifices, or you will have to purchase burner tubes that contain the natural gas orifices. Ensure that all safety measures described in instructions are followed due to the risk of explosion or fire from incorrect installation. Each kit is sold individually.

Burner Cap - Small Sold individually.

Burner Head - 16K This part distributes flame evenly to your cookware.