Hotpoint Range Switches

Surface Burner Switch - 8 Inch - 2500W

★★★★★

★★★★★

1 Review

If your burner element is not turning on or heating up, it is possible there is an issue with the switch. The surface burner switch, also known as an infinite heat switch, is what turns your burner elements on and off, along with adjusting the temperature settings. The switch is controlled by the knob on the panel, and this knob sits on the shaft for the switch. Please note that burner knobs are sold separately from the switch. Before beginning this repair, you will need to disconnect the power supply to your range, and move it away from the wall so you can access the back panel. A helpful tip to keep your wires straight, is as you remove one from the old switch, immediately attach it to the same terminal on the new switch. If the connection is snug, a pair of needle nose pliers will help. This OEM replacement switch is designed to work with your 8-inch burner elements.

Range Surface Element Control Switch - 6 Inch - 1560 W This switch controls the small burner on a range/stove top.

Surface Burner Switch - 240V

★★★★★

★★★★★

1 Review

This switch controls the stove top surface burner.

Surface Burner Switch - 8 Inch - 2100W This switch controls the large burner on a range/stove top.

Dual Element Infinite Switch This switch controls the stove top surface burner.

Infinite Control Switch

Surface Burner Infinite Switch - 1250W

Large Surface Burner Switch - 2350W 240V This switch controls the stove top surface burner.

SWITCH SPDT HIGH AMP This light switch is controlled by opening and closing the oven door

Limit Switch This part acts like a safety thermostat on the appliance. Once it reaches a certain temperature it will shut off the heat source (element) to make sure the temperature doesn't go any higher.