Magic Chef Dryer Seals and Gaskets

★★★★★

★★★★★

1 Review

Fix Number

FIX8691753

Manufacturer Part Number

W10612022

This is a genuine OEM replacement rear drum seal for your dryer. This seal is made of felt and comes with the adhesive required for installation. The purpose of the seal is to prevent hot air from escaping the drum while the dryer is operating. If you notice that it is taking too long for your laundry to dry, that marks are left on your laundry, or the machine is noisy or will not tumble, then you may need to replace the seal.

Fix Number

FIX11741506

Manufacturer Part Number

WP339956

This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches in length, 1 inch wide, about half an inch thick, and has an adhesive backing. The seal is located between the lint duct and the bulkhead of the dryer. You may need to replace the seal if there is air leaking from the dryer while it is running, which would result in your laundry taking too long to dry.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11731610

Manufacturer Part Number

W10861521

This is a genuine OEM replacement door gasket for your dryer. The gasket, also known as a door seal, is used to provide an airtight seal when the dryer door is closed. If the gasket has failed it can cause hot air to escape the dryer and allow for cooler room temperature air to be sucked in. This causes the dryer to run longer, which means it is less efficient. When replacing this part, we find it easiest to remove the door from the dryer and place it on a suitable work surface. Please note that you will need a high temperature adhesive to attach the gasket to the door, and this glue is not included with the gasket.

Fix Number

FIX12745423

Manufacturer Part Number

W11415783

This seal comes with the adhesive backing.

Fix Number

FIX333333

Manufacturer Part Number

239087

Includes high temperature adhesive.

Fix Number

FIX11773177

Manufacturer Part Number

W11035878

This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit.

Fix Number

FIX11741917

Manufacturer Part Number

WP37001132

This part is located between the back of the drum and the rear dryer panel.

Fix Number

FIX334171

Manufacturer Part Number

279264

This front bearing and seal kit comes with the adhesive.

Fix Number

FIX11740735

Manufacturer Part Number

WP31001747

Depending upon your model, this seal can be used on either the front or rear drum. The hi-temp adhesive is sold separately.

Fix Number

FIX11740719

Manufacturer Part Number

WP31001529

If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.