Part Location Diagram of W11035878 Whirlpool Seal and Bearing
See part 38 in the diagram
Replacing your Whirlpool Dryer Seal and Bearing
( Grid squares measure 1x1 inch )

Seal and Bearing W11035878

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$69.28
In Stock
Fix Number:
FIX11773177
Manufacturer #:
W11035878
Manufactured by:
Whirlpool

Product Description

This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit.

Videos For installing this part.

Replacing your Seal and Bearing

Replacing your Seal and Bearing

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Multi Rib Belt - 92-1/4"
$17.17
In Stock
Maintenance Kit
$37.44
In Stock
Rear Drum Support Roller Kit
$14.36
In Stock
Rear Drum Felt Seal
$64.63
In Stock
Two-Piece Split Ring Bearing
$58.67
In Stock
Rear Drum Seal Kit
$71.72
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Paul from San Antonio, TX
Parts Used:
W11035878, W10612022
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Noisy operation
I removed the screws at the lint filter then released the fasteners at the front to allow me to open the top cover. I then unplugged the door switch and removed the 2 screws at top of front cover and removed the front. I then lifted the drum out of the dryer and removed the rear drum felt seal per instructions included with part. then glu ed the new seal to the rear of the drum. allowed the glue to dry (about 30 minutes) while waiting for the glue to dry I replaced the front felt bearing and seal. re-assembled the dryer and tested. Wow what a difference. I also watched both videos available on the site for the repairs I was making. Suggest when replacing the rear seal that you glue about 2 feet around and wait for the glue to set up (about 10 minutes) then install the remainder of the seal and glue in place.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chuck from Cross Lanes, WV
Parts Used:
W11035878
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Drum making noise when operating and vibrating loudly
At first thought drum belt. Could see a felt belt coming from under front of dryer. Googled how to open front panel of dryer. Followed instructions and immediately saw problem. Old seal (felt) had fallen apart. Seal goes on back of panel then drum goes around this. Reverse instructions for taking apart done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Bowling Green, OH
Parts Used:
W11035878, W10612022, WP22002263, WP691366, 349241T
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
drum making load noise when turned on
I removed drum from cabinet and noticed one of the drum support rollers was froze to spindle and wore down in one spot. Both front and rear drum seals were also worn. I ordered the parts and they arrived in 2days. The front drum seal was easy to install but not so much for the rear seal. I installed the rear seal before gluing bye clampin g the seal every foot with 6inch clamps, 5 total and then start gluing and moving the clamps, to one side. as needed. I have done several of these now and this is the best way I've found. Support rollers are easy just need a pair of pliers and a small flat head screw driver. Installing the belt over the drum bye yourself is not easy but can be done. There are several videos online that are a big help.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11773177
Manufacturer Part Number: W11035878
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
1106085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061262311
Dryer - ELECTRIC DRYER
Kenmore
11061402310
Dryer - ELECTRIC DRYER