Whirlpool Dishwasher Caps and Lids
Start With Your Model Number
Popular Whirlpool Dishwasher Caps and Lids
Rinse-Aid Dispenser Cap
Fix Number FIX11746426
Manufacturer Part Number WP8558307The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there could be an issue with the rinse aid cap. Check the cap and its gasket for any damage or melting. If the cap has melted or it is not sealing the dispenser properly, the part should be replaced right away. This rinse aid cap comes with the gasket, so you should discard the existing gasket and rinse aid cap at the same time. The repair is relatively straightforward, and requires no tools.
Fixes these symptoms
- Door latch failure
- Not cleaning dishes properly
- See more...
Rinse Aid Cap
Fix Number FIX11755939
Manufacturer Part Number WPW10524920This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
Rinse Aid Cap
Fix Number FIX11746567
Manufacturer Part Number WP8564929This rinse aid cap or fill cap is for your dishwasher and it screws into the jet dry dispenser. Sometimes the cap can become loose and fall out, which can cause it to melt from the heater. If your cap is damaged or missing, this is the part you will need to replace it. It is made of white plastic and is a little more than an inch in diameter. This rinse aid cap is sold individually.
Dishwasher Rinse-Aid Dispenser Cap
Fix Number FIX11755937
Manufacturer Part Number WPW10524911The rinse-aid dispenser cap covers the port for the rinse agent and keeps the rinse aid inside the dispenser until needed.