Whirlpool Dishwasher Brackets and Flanges

Mounting Bracket

★★★★★

★★★★★

1 Review

The mounting bracket is used to secure the top part of your dishwasher to the underside of your counter or cabinet. If you have solid surface counters (granite, quartz, etc.) you will likely need to side mount your appliance, and this type of bracket is sold separately. It is important to properly secure your dishwasher, as it helps to keep it level, and prevents it from moving, shaking, or tilting forwards. This is an authentic OEM part, made entirely of metal, and approximately 3 inches in length. These mounting brackets are sold individually, however most dishwashers require at least two brackets to secure the appliance to the countertop. It is recommended to check and replace all brackets at the same time, as they tend to wear at the same rate. Attaching the mounting bracket to the top of the dishwasher is simple, and just requires a pair of needle nose pliers to bend the tabs into place. When it comes time to attach your dishwasher to the countertop, please note that you will need screws (sold separately), a screwdriver, and if this is the first time the brackets are being attached, you will also need to use a drill bit to make pilot holes for the screws.

Side Mounting Bracket Kit This mounting kit can be used on solid surface countertops.

BRACKET

SUPPRT-HTR

Spray Arm Tube Hanger

Middle Wash Arm Tube Holder This holder should have a split in the ring at 3 o'clock position.

Dispenser Mounting Bracket

Spray Arm Feed Tube Holder This part holds the spray arm feed tube up.

Water Inlet Tube Holder *Part is manufactured with a split in the ring.

Spray Arm Holder This part holds up the dishwasher spray arm tube.