Uni Dishwasher Parts

Uni Appliance Parts
Shop By Appliance Type

Popular Uni Dishwasher Parts

$19.50
  In Stock
Dishwasher Bottom Door Gasket
★★★★★
★★★★★
(2)
Fix Number FIX9495545
Manufacturer Part Number 809006501
This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposure to water, detergent, and food particles. If the gasket appears cracked, broken, or you notice a leak coming from the door, it will need to be replaced immediately. This gasket measures approximately 23 inches long. For this simple repair, no tools are necessary. Open the dishwasher door and remove the bottom rack. The gasket is located right along the bottom of the door, molded inside the channel. It is held in place in the groove across the bottom. Remove the old gasket by pulling it out with your hands. Take your new silicone gasket and line it up so the notch fits into the groove and slide it in place until it is secure. Reinstall the lower dishrack. We recommend leaving the door closed for a few hours to ensure the gasket is sealed tightly.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
Everette from Hardyville, VA
Dishwasher leaking around bottom of door
Watched the video, easy replacement. Read more...
$29.83
  In Stock
Dishwasher Tub Gasket - Gray
Fix Number FIX8260227
Manufacturer Part Number 154827601
The door gasket provides a watertight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This gray door gasket is made of rubber and measures approximately 73 inches. For this repair, open the dishwasher door and remove the lower dish tray. Use your hands to pull out the old gasket. Clean the channel with a rag. Press the new gasket in place so it sits inside the groove in the door. Keep the door closed tightly for a few hours to ensure a strong seal is made.
Fixes these symptoms
  • Door won’t close
  • Leaking
  • Not cleaning dishes properly
  • See more...
Installation Instructions
Patrick from Pleasanton, CA
leak from door
I ordered the top 3 parts in terms of probability of solving the problem (water inlet valve, tub gasket, and bottom door gasket). I installed all 3 and it did not solve the door leak. Then I realized that the bottom door gasket had come out (in other words, I had not installed it properly). I reinstalled the bottom door gasket (a critical point is that it has to be *pressed in* firmly -- there should be some resistance), and it worked. Note that the bottom door gasket is a hybrid between a true seal and a splash guard. The notch in the middle is designed to drain water from the door back into the tub. Because of that notch opening, there is sputtering and splashing at various points of the wash cycle. This appears to be by design, and those splashes result in water being absorbed by the insulating foam. Thank you to the previous submission/posting authors, as this is what clued me in. Read more...
$42.58
  In Stock
SPRAY ARM
★★★★★
★★★★★
(1)
Fix Number FIX12705424
Manufacturer Part Number 5304518927
If the Spray Arm in the bottom of your dishwasher becomes damaged or broken, it is important to replace it as soon as possible. Broken spray arms can result in your dishes not being cleaned properly, or?cause?water?to?leak?onto your floors while?running.?Damage commonly occurs?due to the spray arm melting; it can come loose during the wash cycle, and rests against the heating element. The plastic then melts, and the arm either?does not?fit back into place or the?holes become?distorted?which causes water to spray in different directions.?Replacing this part is easy, and tools should not be?required.?First remove the lower dish rack to access the spray arm,?pull out?the broken piece, and pop the new?one?into place.?Once you put the dish rack back in,?you?ll?be?ready to go!?Spray arms for the upper rack are sold separately.??
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Installation Instructions
Didi from Grand Rapids, MI
The lower sprayer arm had been knocked off and had melted against the heating coil.
I entered the model number of my dishwasher and scrolled down until I found the picture that matched the damaged part. The video that accompanied the part listing showed me how to wriggle the arm until it snapped in place. I offered the part, followed the video instructions, and everything works again! Read more...
$39.22
  In Stock
Water Inlet Valve - 120V 60Hz
Fix Number FIX1990907
Manufacturer Part Number 154637401
This water inlet valve is usually located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Installation Instructions
Patrick from Pleasanton, CA
leak from door
I ordered the top 3 parts in terms of probability of solving the problem (water inlet valve, tub gasket, and bottom door gasket). I installed all 3 and it did not solve the door leak. Then I realized that the bottom door gasket had come out (in other words, I had not installed it properly). I reinstalled the bottom door gasket (a critical point is that it has to be *pressed in* firmly -- there should be some resistance), and it worked. Note that the bottom door gasket is a hybrid between a true seal and a splash guard. The notch in the middle is designed to drain water from the door back into the tub. Because of that notch opening, there is sputtering and splashing at various points of the wash cycle. This appears to be by design, and those splashes result in water being absorbed by the insulating foam. Thank you to the previous submission/posting authors, as this is what clued me in. Read more...
$82.27
  In Stock
Dishwasher Lower Dish Rack Assembly
★★★★★
★★★★★
(1)
Fix Number FIX8760885
Manufacturer Part Number 808602302
If the bottom rack of your dishwasher has seen better days, it may be time for a replacement. Some indicators are if it has rust spots, it will not slide in or out easily, or your dishes are not cleaning properly. This is a genuine OEM replacement dish rack and roller assembly for the lower level of your dishwasher. The dish rack is white in color and measures approximately 21 inches wide by 22 inches deep. There are eight light-grey rollers to ensure the rack rolls in and out smoothly. No tools should be required to replace the assembly. This kit does not come with a cutlery basket, you can continue to use your old one, or a new basket can be purchased separately.
Fixes these symptoms
Installation Instructions
Carol from Wenonah, NJ
Lower dish rack rusted & cracked
Just rolled old one out & rolled new one in. Awesome!!! Received part within 24 hrs!!! Read more...
$62.38
  In Stock
Dishwasher Upper Dish rack with Wheels
Fix Number FIX10062929
Manufacturer Part Number 5304498211
Fixes these symptoms
Installation Instructions
Mary from Brookfield, WI
New dish racks
So easy!! Unboxed the rack. Top rack on UN hooked, New one hooked in. No tools, no problems!! So easy!! Perfect part!! Read more...
$8.43
  In Stock
SUPPORT
★★★★★
★★★★★
(1)
Fix Number FIX12712289
Manufacturer Part Number 5304518968
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Installation Instructions
J D from Edgewood, WA
worn spray arm and support
remove arm pull straight up, remove strainer turn 1/4 turn, remove support three screws, install new parts Read more...
$26.07
  Special Order
Filter Base
Fix Number FIX11770494
Manufacturer Part Number 5304506533
Located at the bottom of the dishwasher, this filter keep large particles of food and foreign objects away from the pump.
Fixes these symptoms
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
J D from Edgewood, WA
worn spray arm and support
remove arm pull straight up, remove strainer turn 1/4 turn, remove support three screws, install new parts Read more...
$13.12
  In Stock
Single Rack Roller Kit
Fix Number FIX452448
Manufacturer Part Number 5300809640
This is a single rack roller kit for your dishwasher. This kit comes with one axel/clip, and one wheel/roller. The kit is used for the lower dishrack, and allows your rack to move freely. You will need two kits for your upper and lower rack. We recommend replacing this part in pairs for an even wear.
Fixes these symptoms
Installation Instructions
Robert from Copiague, NY
Stalled Timer, dirty dishes, detergent wasn't dissolving properly.
At first I thought the Timer was bad because it was stalling. The Timer only malfunctioned in High Temp Wash or High Temp Rinse mode. After removing and checking the timer, I determined it was working OK. Someone mentioned that a bad thermostat could cause the Timer to stall, but I wasn't having any problems with hot water temperature. I noticed the detergent wasn't dissolving completely, and the water flowing into the tub sounded weak, so I replaced the water inlet valve. This solved all my problems. Dishes are coming out sparkling clean and the Timer doesn't stall in High Temp mode. I just followed the video on Part Select to make the repair. I didn't pull out the whole dishwasher from the counter and I removed the Lower Door panel in addition to the Kick Plate. Removing the Lower Door Panel provided easier access to the valve. I hope this helps other people troubleshoot their dishwasher. Once again this site saved me a chunk of money. Read more...
$9.76
  In Stock
Heating Element Brass Nut
Fix Number FIX1524878
Manufacturer Part Number 154106202
This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will solve this problem. The tools needed for this repair are a 1/2 inch wrench, 1/4 inch nut driver, and needle nose pliers. To repair, locate the two element heating nuts. Next, disconnect connecter wire and remove nut with wrench. Tip: when installing new nut, remember to add insulator sleeve back on. As a safety precaution, remember to disconnect the water supply line before beginning this installation. Also, unplug your dishwasher from the power source.
Installation Instructions
janet from Galena, MO
water leaking out bottom
turned off power to dishwasher at the elec. panel. removed the "kickplate" off front bottom of dishwasher. leak was coming from where the heating element went thru tub. removed connector from bottom of heating element and brass nut practically fell off. it was cracked. ordered new brass nuts from this site it arrived quickly and installed it immediately. used a deep well socket to tighten the nut and leak was gone. Waaa Laaa!! Read more...

Appliance Type

Popular Uni Dishwasher Models