Dishwasher Racks

★★★★★

★★★★★

42 Reviews

Fix Number

FIX10064063

Manufacturer Part Number

W10712394

This rack adjuster kit is connected to the dishrack and allows you to adjust the height of the upper rack of your dishwasher up and down to give more space. The kit is constructed of gray plastic and metal, and measures approximately 12 inches wide and 6.5 inches tall. This kit includes 2 adjuster arms, 2 adjuster actuators, 2 gray adjuster covers, 2 gray adjuster housings, and 4 screws. The rack adjuster can break from material fatigue or prolonged high temperature exposure, compromising the integrity of the materials. The most common indicators of a faulty rack adjuster include leaking, door latch failure, the door not closing, dishes not cleaning properly, and failure to start the wash cycle. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. Replacing this part requires beginner repair experience, basic hand tools, and some disassembly of the dishwasher. Do not forget to unplug the dishwasher or shut off the water supply to the appliance underneath the sink before you begin.

Fix Number

FIX16618974

Manufacturer Part Number

WD28X28918

This lower rack and silverware basket kit fits select GE dishwashers. It helps keep dishes and utensils secure during the wash cycle and replaces damaged or worn-out racks. The kit includes a durable rack and basket for improved cleaning and organization. Be sure to confirm compatibility before ordering.

★★★★★

★★★★★

1 Review

Fix Number

FIX17137102

Manufacturer Part Number

WD28X31819

This is a manufacturer-approved lower dish rack with six wheels and supports. The lower dish rack is where dishes are placed in the bottom portion of the dishwasher to be cleaned during the wash cycle. It is commonly replaced because it is rusty or starting to corrode, which can cause spots on your dishes. For this simple, tool-free repair, start by opening the dishwasher door, pulling out the old lower dish rack assembly, removing the silverware basket, and lifting the assembly up and out of the unit. Slide the new part into place, put the silverware basket back on the rack, and close the dishwasher door.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX10057160

Manufacturer Part Number

W10728159

This gray lower dishrack fits select Whirlpool, KitchenAid, Maytag, and other compatible dishwashers. It holds dishes securely during wash cycles and is ideal for replacing racks that are damaged or rusted. Rollers are not included and must be reused from the original rack. Installation is simple with basic tools, but be sure to disconnect power and water before beginning.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX16745761

Manufacturer Part Number

5304532969

This lower dishrack assembly comes with 8 rollers enabling it to roll in and out with ease. The dishrack is approximately 22 inches long x 20 inches wide. The dishrack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, the part should be replaced. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly. This part is also known as a dish rack or a dishwasher rack.

Fix Number

FIX2379463

Manufacturer Part Number

5304475618

This dish rack includes the wheels. It is used in the dishwasher.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX8746204

Manufacturer Part Number

WD28X10384

Designed for select GE and compatible dishwashers, this lower dishrack holds dishes securely with sturdy wire tines and includes rollers for smooth movement. It’s built to handle heat and moisture and helps fix issues like rust, cracks, or poor dish placement. A reliable replacement to restore dishwasher performance.

Fix Number

FIX12742475

Manufacturer Part Number

AHB73249104

Fix Number

FIX8712513

Manufacturer Part Number

00418498

This tine hold is a genuine OEM replacement part for your dishwasher, measuring approximately 1 inch long and is sold individually. This part is also known as a tine clip or a rack flip tine clip. It is used to the hold the tines of your dishrack in place. Once you have adjusted the tine racks to a position that works with your dishes, this clip will hold the tines in place and is designed to hold two rows. There are no tools required to install a new clip, but a flathead screwdriver may be needed to remove the old one. The new clip just snaps onto the dishrack, and you can then adjust and hold the tines in place.

Fix Number

FIX2379469

Manufacturer Part Number

5304475624

This lower rack assembly fits select Frigidaire dishwashers and helps keep dishes secure during washing. If your rack is damaged or not holding items properly, replacing it can improve cleaning results. Check your model number to ensure compatibility before purchasing.