LSE9900AFE Maytag Washer Dryer Combo - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- keith from Brookhaven, PA
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken door latch, door did not stay closed
Saved a lot of time by just using needle nose pliers to break the receiving end of latch off of the front of the dryer. No big deal if parts fall Inside, won't hurt anything. Then just pressed new part into front of dryer. No need to remove front dryer panel.latch piece on door was not broken so I left it alone. Took all of about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nicholas from Tacoma, WA
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Latch
The dryer latch had fallen into the dryer door itself and the door no longer stayed latched shut. I purchsed a replacement latch and simply popped it into the hole. No tools! I did leave the old latch to rattle around inside the door whenever it opens though.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Duck, WV
- Parts Used:
- W10820036
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Stopped and would not restart / start.
1)Shut off power supply to dryer. 2)Removed lint filter. 3)Removed two screws that secure filter duct to dryer top. 4)Lifted front of top to gain access to door switch. 5)Removed two switch mounting screws. 6)Removed the two power leads. 7)Reconnected power leads to new switch using "Normally Closed" terminal on switch. 8)Reversed the previous procedures to complete repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald D. from Miami, FL
- Parts Used:
- WP22001448, 206638
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
on spin we notice water from the bottom(underneath)the washing machine.
I did it per the video on line and was a snap.I don't have issue recomending the web site to my freinds who want to do repairs themselves.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Knapp, WI
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The dryer door latch had broken.
The older latch was removed and the new one was inserted in to the same opening. It was great! We had the new latch within a couple of days after ordering the part. This worked out really well. Thanks!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from Elkhart, IN
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door latch receiver was broken
I followed the instructions with the new parts. Thank you very much for including these tips.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Tabernacle, NJ
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Dryer door would not close
Sooooooo easy! Ordered the part on-line and it arrived the very next day! Watched the 'how to' video on-line and the fix was a breeze. Bought my Maytag dryer back in 1989 and this is the only problem it's had. For a repair just under $5.00 plus shipping? I'll take it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Byron from Los Angeles, CA
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door catch broken.
I pried out the old one slightly and grabbed it with pliers. Quite possibly the metal catch dropped into the door section, but no problem. I pushed the new one into place with the side of the pliers. Probably 3 minutes time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ralph from Yukon, OK
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door will not stay latched.
Pried out the old female hold and snapped in the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lloyd from Middlebury, IN
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken latch
1.Separate the inner and outer door panels. Install the new latch thru the backer plate. 2. Remove the front panel to access the door catch. Remove the existing catch and replace.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kevin from rockton, IL
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
P;atic latch in in door frame broke.
I removed two screws from the bottom panel,pulled bottom out, and lifted front panel off. Took pliers to back of the old latch to compress the expansion tabs, squeezed and removed. Pushed new one in untill it went through metal backing plate and snapped in place. Replaced the cover and screws. Opened door and took out two screws on the edge and one for the knob. Spread out door halves,used pliers to work out other latch part. Pressed in new part and reassembled. Works great for another twenty years!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Houston, MN
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Door latch on older dryer had broken, would not run
The video that this website provided made the replacement of the door latch a breeze. Thank you for the instruction. Mary.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- law from deep river, CT
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
door did not close
easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Scotts Valley, CA
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
the receiving side of the door latch broke
I entered the model number and make of the dryer, selected the door latch part and ordered. My order had a link to a video that explained installation. It was pretty easy, and I am a girl :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Iota, LA
- Parts Used:
- W10820036
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
Dryer door switch broken or burned out
My wife did the repair. Went on your website and watch the video on how to replace the switch and she was able to do it herself. I didn't mind at all. Saved $75.00 service charge.
Was this instruction helpful to you?
Thank you for voting!