6EC3FHKXWQ00 Whirlpool Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Raymond from Plain, WI
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Pan Slide Tracks Were Broken
I ordered the parts and recieved them in about 4 days. I was very pleased with the time between order and delivery. I watched the installation demo provided and it was as spot on. All I needed was a small hammer to tap the old slide loose and the new slide on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from Marietta, GA
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace broken hydator drawer slide
Remove old slide (broken part ). Tap in new slide with small hammer or kitchen knife handle.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Fremont, CA
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced a missing part
Inherited this fridge from a sibling, but was missing a track so I couldn't use one drawer. Researched online and found the part from Partselect, and the track arrived literally the next day. Perfect fit, and now I can use the drawer. Made the wife happy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenda from Ctrowley, TX
- Parts Used:
- WP2223288
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken track for drawer
Removed the old slid in the new!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Savannah, TX
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Pan side track cracked
Pulled the shelf out and replaced the slide rails. I watched the how to video on your website and it was very accurate and easy! Took longer to empty the drawer than it did to make the repair. Easy to do!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Virginia Beach, VA
- Parts Used:
- WP2155013
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Kick Plate Clip Broke
On the left side I unscrewed the screw and replace it with a new one . The right side in had to take s file and file of the rivet. You can use a rivet gun or a metal screw to replaced the clip. Once it is finish open the refrigerator door to see how to line the kick plate into the clip. A piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Rancho Palos Verdes, CA
- Parts Used:
- WP2223320
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
plastic pan slide tracks broken (both sides)
These are the left & right slide rail tracks for the pull-out meat tray located just under one of the interior shelves. When removing or installing plastic parts you should always use a delicate touch, because plastic is brittle and can crack or break. To install these rails, I used a small screwdriver and a small rubber mallet to lightly tap the old ones off. The new ones I put the tabs in the holes and using the mallet & screwdriver, I lightly tapped into place until I heard a click-lock. So...... use a delicate but forceful approach. Good luck !!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rick from Round Rock, TX
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced broken plastic slides
Less than 5 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JohnWeaver from O FALLON, IL
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken slides for the drawer in the refrigerator
I got the part in 1 day. I ordered at 1pm and got it at 11am the next morning. I used the wooden handle from a screwdriver and a hammer to tap the slides loose. The new ones went on easily. It took me longer to get everything off the support shelf and back in afterwards then it did to do the job. Actually doing the job took 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Boynton Beach, FL
- Parts Used:
- WP2188820
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Freezer temperature too cold
Temperature in freezer too cold. Temperature display showed higher temperature than actual which caused the freezer to continually run. Thermister is found behind a white box on wall in freezer. Unscrew the box from wall and easily disconnect the thermistor clamp. Replace in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from Wichita, KS
- Parts Used:
- WP2223320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Pan Slide Track Busted
This was a very easy repair, it took about 3 min and we were good to go. First, I removed the pan and slid the broken track out of the self-locking slots. If you're unsure as to push or pull the track out of the slot, take a peek at the slots before you start. This came right out. I got the new one, aligned the tabs with the slots, slid it in and made sure it "popped" in place. There was nothing complicated about it. One tip to get the old one out is to make sure you apply some pressure to the track as you are pulling or pushing it out of the self-locking slots. Btw I was able to get my parts in less than 48 hrs, std shipping! Awesome, and thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rocky from Downey, ID
- Parts Used:
- WP2223320
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The Pan slide track on one of the crispers was cracking on the front and letting thr crisper to slide out and fall on the floor,if you would let it
Removed the shelf and brakets Removed the broken sliders from the shelf brackets and replaced them with the new one's from parts select. the new sliders are a tight fit. I used a large screw driver laid side ways and taped on it to seat the sliders into the slots. NIce to have someone help hold the shelf. Reinstall the shelf backing into place. WARNING This is now the time to get out of the kitchen.OH no to late had to help clean the whole thing out and the freezer too. You need to be quick on this one. Do not let her fill the sink with hot soapy water or your doomed Less than a 15 minute job is now an hour AND 15 MINUTE JOB.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Cary, NC
- Parts Used:
- WPW10233488
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
drawer edge was broken.
I simply replaced the old broken crisper drawer with the new one. Simplest repair ever.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kissing Oaks from Florahome, FL
- Parts Used:
- WP2223320
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
track had two extra lock tabs that had to be ground off
ground off the extra tabs (part had 3 lock tabs; mine had only one). Had to tap the part into place with a hammer; could not install by hand only as the video stated
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arthur from Henderson, NV
- Parts Used:
- WP2224173
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic was cracked on three door shelf bins
Took out old ones and replaced with solid construction new ones, which will prevent them for cracking and breaking again. So easy a fool could do it, which I proved!
Was this instruction helpful to you?
Thank you for voting!