22314 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- HElen from Pawleys Island, SC
- Parts Used:
- A341
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic ends on old cover broke.
Opened the box and placed new cover over grill.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paula from Wautoma, WI
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
1 element of a 4 element burner worked
There was no tools required with this job. I had to remove the old elements from the stove top and replace them with the newly purchased ones from this site. The hardest part was to located the parts I needed. I went to Best Buy to purchase these and they said they no longer stock them. They quoted me double the price that I paid and I received them a lot faster this way and did not have to rely on them for help. I will recommend this site to all my friends.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ronald from ESTERO, FL
- Parts Used:
- WP5700M611-60
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
drain jar lids rusted and broken of their mounts
The lids are fastened to the underside of the unit by rivets....3 to each lid.
I used a cordless drill and small drill bit to drill through the rivets to remove the old lids and remains of the rivets.
The new lids are easily fastened back using a rivet gun ( about $20 in Lowes) using small 1/8th aluminum rivets.
No real problems.
1 thing to note is that the drill bit will pass through the old rivet by about 1/4 inch before it comes up against the upper level of the BBQ floor so do not drill any deeper.The aluminum rivets are easy to drill through and you will easily feel when the rivet is drilled through.
I used a cordless drill and small drill bit to drill through the rivets to remove the old lids and remains of the rivets.
The new lids are easily fastened back using a rivet gun ( about $20 in Lowes) using small 1/8th aluminum rivets.
No real problems.
1 thing to note is that the drill bit will pass through the old rivet by about 1/4 inch before it comes up against the upper level of the BBQ floor so do not drill any deeper.The aluminum rivets are easy to drill through and you will easily feel when the rivet is drilled through.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Geri from El Dorado, CA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
part was just looking old and worn
Really simple just had to remove the old part by simply pulling it out of the socket and then insert the new cartridge. It looks great it was shipped in a matter of days I was surprised to get it so soon.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pamela from Kerrville, TX
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Old stove burners were rusted out and hard to clean
Unplugged old units and plugged in new units. They fit perfectly and it was all so easy. I have been very happy with PartSelect services.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marion from Center Point, IA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cartridge was in need of replacement unit
Unplugged unit,cleaned stove and replaced new cartridge.
Was this instruction helpful to you?
Thank you for voting!
I had just installed new burner moduels on my stove top but was unable to find a cover for my grill and decided to go on line to look for one. I was thrilled when I located just what I was looking for. I also had a problem with large pots and pans causing a dark grease like stain on the stove top ar
All I had to do was insert the new burner and place the grill cover over the existing grill top. Works like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sabry from Florence, Oregon, OR
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Glass ceramic was damaged due to sugery spill over.
Remove and replace. It was a snap, no skill required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Sour Lake, TX
- Parts Used:
- A302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Surface of griddle was worn out
This griddle just simple slips into place above the electric elements.
The REAL story is the efficiency with which my order was filled and shipped. I was impressed! There were constant updates on my order and shipping information! Great job!
The REAL story is the efficiency with which my order was filled and shipped. I was impressed! There were constant updates on my order and shipping information! Great job!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wendel from Marietta, GA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Burners not working
Plugged it in. It was that simple!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from Brandon, WI
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
One burner ,of a 2 burner cartridge, was burned out. I called an appliance dealer. no help. Went on line, typed in Jenn-air cooktopand several choices came up. Clicked on yours, went thru about375 parts. Spotted what I thought was was the right one. Called in. It had three flat prongs and one ro
I lifted the old old cartridge on one end and slid it out. Then I shoved new cartridge in place, tried the burners. Perfect! Saved me from getting a entire new cooktop. Would recommend PartSelect to anyone looking to repair an old stove.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Ft. Myers, FL
- Parts Used:
- A341, WP7772P007-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
The Air Inlet Grill was corroded
I replaced it with a new one. I simply picked up the old one and set the new one in its place. No tools required and the part fit perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Exeter, NH
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
burner would only get super hot. could not control temp.
removed 4 screws holding burner controls. removed wires off old and placed on new burner control. very pleased with quick shippig of part. two days and range was as good as new. excellent company to buy from
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Grand Junction, CO
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cook top burners on old Jenn-Aire finally quit/broke
Being able to find the right cook top on-line and order it without running around trying to find it in stores was great. Was able to replace old electric burners with new ceramic cook top. Nice to update and easy to 'plug' in the module.
Thanks for being there.
Thanks for being there.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Al from Monroe Twp, NJ
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
broken switch
Took the (6) screws holding the top of the stove out, then removed the switch screws(2). Then lifted the top, so as I could reach and get at the switch. And then I repeated the above. It was alot easier the second time. Duh I erred the first time and replaced the wrong one and before I relized it, I opened the switch to check out. All in all. I still got satisfaction from doing it myself. Thanks Parts Select
Was this instruction helpful to you?
Thank you for voting!