22314 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Brent from Rancho Santa Fe, CA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I have had this cooktop, 20 plus years, raised 5 kids
I just popped out the old cartridges, and popped in the new ones. It looks like a new cook top. Thanks so much..I'm thrilled..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Mission Viejo, CA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
2 top burners went out
I just removed the old cartridge and replaced with the new one--that easy! Thank you so much
Was this instruction helpful to you?
Thank you for voting!
Burner switch was malfunctioning.
1. Removed all four switch knobs (to be replaced with new knobs purchased with the replacement switch.(unnecessary if you are not going to replace all the knobs)
2. Removed the switch plate assembly by removing two sheet metal screws.
3. Inverted plate assembly and removed five wires and then removed two additional screws that secured the faulty switch to the plate assembly.
4. Reconnected the five wires and attached the new switch to the plate assembly.
5. Re-positioned the assembly on the cooktop and secured with the two sheet metal screws.
GAME OVER!
2. Removed the switch plate assembly by removing two sheet metal screws.
3. Inverted plate assembly and removed five wires and then removed two additional screws that secured the faulty switch to the plate assembly.
4. Reconnected the five wires and attached the new switch to the plate assembly.
5. Re-positioned the assembly on the cooktop and secured with the two sheet metal screws.
GAME OVER!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Spring, TX
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heat elements quit working
I unplugged the old unit and plugged in the new unit. Done in less than 1 minute. It took more time to open the shipping box.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Mount GIlead, OH
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Changed out Element
First i lifted the old cartridge out then i put the new one in and turned it on and it worked fabulously.
took no more than 30 seconds
took no more than 30 seconds
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert W. from Essex, MA
- Parts Used:
- A302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Griddle was burned-out - non-stick coating was deteriorated
Very happy to find a replacement and it fit perfectly.
Thank you !!!!!
Thank you !!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Morris from Yazoo City, MS
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
my wife wanted matching coil elements.
removed grill cartridge and replaced it with the new coil element cartridge.
It was like having a brand new range.
Thank you for your fast and reasonable service.
YOU WILL ALWAYS HAVE MY BUSINESS!
It was like having a brand new range.
Thank you for your fast and reasonable service.
YOU WILL ALWAYS HAVE MY BUSINESS!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bertram from San Clemente, CA
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Overheating burner
Finding part needed and quick shipping were great. Web site so helpful. Initial attempt to remove old part was troublesome because I took out wrong screws thinking I had to remove parts beneath burner. Once I figured it out, it was so easy.
1. Turn off power.
2. Remove 4 screws BELOW control panel (open oven door to see them)
3. Pull off 7 front knobs.
4. Lift out loosened panel.
5. Take out the two screws holding control switch to front panel. Note orientaion of switch.
6. Replace wire by wire to new switch.
7. Put it all back together. Make sure switch is put in same direction.
8. Turn power on.
1. Turn off power.
2. Remove 4 screws BELOW control panel (open oven door to see them)
3. Pull off 7 front knobs.
4. Lift out loosened panel.
5. Take out the two screws holding control switch to front panel. Note orientaion of switch.
6. Replace wire by wire to new switch.
7. Put it all back together. Make sure switch is put in same direction.
8. Turn power on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Palo Alto, CA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
We are renting a house with a stove that only had two burners on one side and a grill element on the other. We needed four burners.
This was an extremely simple repair. No screws, no nothing. If you can plug in a lamp, you can swap out this part just as easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Daytona Beach Shores, FL
- Parts Used:
- WP7518P054-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grill coating had eroded.
Simple, take off the old and put on the new/ Delivery was excellent (next day).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Ledyard, CT
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace element cartridge
I placed my order online and received the replacement parts the very next day - thank you so much!!
The hardest part of this repair job was removing it from the boxes! Pulling out the old cartridge and inserting the new was as easy as could be!
The hardest part of this repair job was removing it from the boxes! Pulling out the old cartridge and inserting the new was as easy as could be!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Horacio from Laredo, TX
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Burners on the stove stopped working
I was told that we needed a new stove at an estimated cost of $3900. I decided to google the parts that were not working after I was able to identify the Part number & model. I was first advised to look at Lowes, which I did and was not successful. I did another web search the Part Select site came up. At first I was able to find the part, but the color. A simple phone call and a helpful (Human) voice at the other end gave me a new model number and in less than 5 minutes I had made my order. Total cost $368.00 including shipping and handling. My stove is working like new. Total savings $3500 and change. Satisfaction 100%. I have placed the web site in the must have category.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Crysta Lake, IL
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed to replace the old burner cartridges
1. Lifted out the old burner cartridges
2. Opened the box from PartSelect
3. Inserted the new burner cartridges
It's plug and play. No tools required !
2. Opened the box from PartSelect
3. Inserted the new burner cartridges
It's plug and play. No tools required !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pam from Oregon City, OR
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wanted to update our white induction unit (still works)
Simple. We just unplugged the old white induction unit (still works after 18 yrs) and plugged in the new black radiant cartridge. Great customer assistance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Holbrook, NY
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating coils (burners) were not working
when the new cartridges came in all I did was unplug the old and plug in the new and I had a new stove
Was this instruction helpful to you?
Thank you for voting!