22307 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dwayne from Minden, LA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
eyes burned out on old cartridge
Simply unpluged the old cartridges and plugged in the new ones, it could not have been easier. My 18 year old cooktop looks brand new. My old cartridges were black and the new ones are stainless, but, the look is good, since most new appliances are now stainless. The best part is that it cost less than half of what a new cooktop would have cost plus all of the mess that would have been made tearing out the old one and installing a new one. Thanks PartSelect, A Very Satisfied Customer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marty from Florence, KY
- Parts Used:
- A302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
installed griddle and new burners
unplugged old one and installed new griddle and burners. very easy and less than 30 seconds to complete.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from Salem, IN
- Parts Used:
- WP5700M426-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Element failed
Simple plug in.
Was this instruction helpful to you?
Thank you for voting!
Faulty fan switch and dirty grease filter
Removed 2 screws and lifted the control panal. Replaced the switch. Could not use nuts that came with the switch. Had to reuse the oringinals.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from BEACHWOOD, OH
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating elements in one cartridge did not heat; in the other cartridge, inifinite switch needed
Removed and replaced infinite switch ; removed and replaced both cartridge so that they matched
manual instructions were included in the email notification re' shipping confirmation
manual instructions were included in the email notification re' shipping confirmation
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from CHAMPAIGN, IL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Bad burner on surface module.
Remove old module and insert new one. Took longer to get out of box than to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PHYLLIS from CAMANO ISLAND, WA
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Cracked glass top
Replaced unit
Was this instruction helpful to you?
Thank you for voting!
Old coil went out
I pulled out the old cartridge cleaned the stoptop up. Plugged in the the new cartridge ..there was a little steam left over fromt he cleaning when I turned up the heat but it went away. Looks great and save me $3k the difference in the price of a new stove top.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Las Vegas, NV
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted to replace the grill set and the older style solid cartridge element in my cook top.
I simply removed the old cartridge by lifting it up and pulling the plug end out. I slid the new coil cartridge with the plug end in its place. The grill replacement was similar. Remove the grll grates, pull out the burner element from its plug position, remove the grill rocks and insert the new coil cartridge in its place. No tools or special skills required. It's like I now have a new cook top.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- connie from demarest, NJ
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cooktop did not heat up
Just unplug the old broken cartridge and plug in the new one. It was very easy. Took 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Lebanon, TN
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
heating element was bad and couldn't locate anywhere else for this price. Outstanding service and phone assistance. Will use again for sure!
Simple repair. Unplugged element cart. and replaced.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Malcolm from Lynchburg, VA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Stove did not include any burners only grill
When burner insert arrived just plugged in. Piece of cake !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Emily E from Saint Louis, MO
- Parts Used:
- A341
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed part for stove, so I could list and sell the house.
I needed two parts for the Jenn-Air stove that was in a house I was trying to get ready to sell. I didn't realize I needed the parts until the day before the house was to be listed. So, I was able to order from Parts Select and have the parts shipped overnight for an extra fee. They arrived the next morning. After opening the box, I realized the wrong color had been shipped. I called and the service I received was just awesome. The overnight shipping was refunded. And the right part was shipped out at no extra charge. I was told to keep the first part that had been shipped as well. The new part arrived the next day. Thumbs up for Parts Select! They are my new go-to-guy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Colette from Baton Rouge, LA
- Parts Used:
- WP707929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old filter to replace
:-) - Just removed the old one and replace with the new one. Nothing to it. Takes 30 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Williamsburg, VA
- Parts Used:
- 674744
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
One of the two door springs broke
I followed the instructions that came with the spring and found them to be very complete. The repair was easy. The repair involved removal of the lower access door, installation of the new spring and replacing the access door.
Was this instruction helpful to you?
Thank you for voting!