1108151845 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from Colleyville, TX
- Parts Used:
- 695370
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
The timer became intermittent and needed replacement.
I removed the back cover of the control console (after unplugging the dryer of course), used a vacuum to clean several years of dust and lint, and sized up the job. Since nearly a dozen wires connected to the timer, I made detailed notes and a drawing to insure that each wire was reconnected in its proper location. Some of the wire connectors were quite difficult to reach and remove with my fingers, so I carefully used some needle-nose pliers to remove them. The timer was easily removed with a nutdriver. Replacement was a snap, especially since I had a great diagram for reconnecting the wires!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from KOKOMO, IN
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke
Placed lint filter in opening and pushed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marilyn from HORNICK, IA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint collector was cracked and I was unable to insert easily.
Simply removed old dryer lint collector and installed the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beatrice from WALTHAM, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced the dryer lint screen filter
removed the old damaged filter and replaced with the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy (Hairways) from WOODMERE, OH
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from FAIRPORT, NY
- Parts Used:
- W11778253
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Handle broke off of the Lint filter
Removed old filter and replaced with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maura from Burbank, IL
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen was broken - replaced it with a new one.
There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- West from Montgomery, AL
- Parts Used:
- W11778253
- Difficulty Level:
- Difficult
- Total Repair Time:
- 15 - 30 mins
The handle would not seat" , with the old dryer lint slot. Had to remove the handle and leave the medal holder , to which the handle was popped on, by slot and hooks.
I inserted the sharp kniife point, pryed back a flap , thus releasing the nylon locking hook, in the slot. then did the other side...I removed the white plastic handle, leaving the metal frame, which lay more flat in the filter channel. I put a box of screws on top of the dryer flap to keep it snug.. this is a Kenmore about 15 years old.
Grahare
Grahare
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Monroe, NY
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint filter handle broke off
the replacement part fit perfectly, as I thought it would given another repair story. The repair took less than a minute to take the old one out and put the new one in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Royal oak, MI
- Parts Used:
- 695370
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
dryer would not start
loosened the control pannel-took the back off,held the new timer next to the existing one and switched the 8 to 10 wires one at a time from the old to the new unit,installed it ,put the knob back on and I was good to go.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Lewisville, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer not drying clothes
By simply replacing the lint filter our dryer now dries clothes in less than an hour like it did when it was new.
Prior to replacing the filter it would take 2 hours to dry a load of clothes.
Prior to replacing the filter it would take 2 hours to dry a load of clothes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carrie Eplen from Kingsland, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken handle
removed old unit and replaced with new. perfect fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Wyncote, PA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old lint screen was torn and in need of replacement
The replacement that was ordered was a perfect fit for the worn part and merely required placement into the lint screen area. The entire procedure, from ordering the part, to installation was amazingly easy. I would not hesitate to order future parts from PartSelect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy from Kingsbury, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint screen broken
Open box, insert lint screen!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cassandra from Chicago, IL
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken part
Replaced the part. It just slid right in to the appropriate space on the dryer.
Was this instruction helpful to you?
Thank you for voting!