1108151845 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Claude from Austin, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint Filter wore out.
It required no tools, just take out the old torn filter and slip in the new one. I should have ordered it a year ago, with the ease of the website and the delivery via Fed Ex. super easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Evelyn from JACKSONVILLE, FL
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Needed a new lint filter
Took the old one out, replaced it with new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lary from Aurora, CO
- Parts Used:
- WP688865
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob broke due to fatigue after years of use.
The original part is no longer manufactured. However, PartSelect provided a cross reference from the original part number to an acceptable replacement. The new part simply had to be lined up and pushed on to the shaft. The time required to install the replacement was approximately one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jean M from CHESAPEAKE, VA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint would no go throw
Received the new lint removal from the box and install it easily
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sarah from PINECREST, FL
- Parts Used:
- WP688865
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer knob plastic shaft cracked
The new knob went right on my 33 year old Kenmore dryer. It looks just like the old knob except that it is shiny and new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from COLUMBUS, MT
- Parts Used:
- WP688865
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The old knob cracked on the innerpart.
I just lined up the knob with the post and pushed it on, easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from POLAND, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint filter cracked
Removed old filter, replaced with new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stacey from Corinth, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the handle had broken on the lint filter so i had fashioned paper clips into the holes to get the filter out
after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLIAM from SEBASTIAN, FL
- Parts Used:
- WP688805
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
The dryer nob wasn't working the dryer knob broke off inside the unit
It was very easy to install the new parts successfully thanku parts select I will always keep using your business the representative was so helpful and understanding my problem I wish I could remember his name he was outstanding and a 100 thumbs up to him
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Colleyville, TX
- Parts Used:
- 695370
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
The timer became intermittent and needed replacement.
I removed the back cover of the control console (after unplugging the dryer of course), used a vacuum to clean several years of dust and lint, and sized up the job. Since nearly a dozen wires connected to the timer, I made detailed notes and a drawing to insure that each wire was reconnected in its proper location. Some of the wire connectors were quite difficult to reach and remove with my fingers, so I carefully used some needle-nose pliers to remove them. The timer was easily removed with a nutdriver. Replacement was a snap, especially since I had a great diagram for reconnecting the wires!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- West from Montgomery, AL
- Parts Used:
- W11778253
- Difficulty Level:
- Difficult
- Total Repair Time:
- 15 - 30 mins
The handle would not seat" , with the old dryer lint slot. Had to remove the handle and leave the medal holder , to which the handle was popped on, by slot and hooks.
I inserted the sharp kniife point, pryed back a flap , thus releasing the nylon locking hook, in the slot. then did the other side...I removed the white plastic handle, leaving the metal frame, which lay more flat in the filter channel. I put a box of screws on top of the dryer flap to keep it snug.. this is a Kenmore about 15 years old.
Grahare
Grahare
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from FAIRPORT, NY
- Parts Used:
- W11778253
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Handle broke off of the Lint filter
Removed old filter and replaced with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carmen from CUSHING, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Had a torn lint filter
Removed replacement from box. Threw old one out, the new one fit perfectly, and securely.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from KOKOMO, IN
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke
Placed lint filter in opening and pushed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy (Hairways) from WOODMERE, OH
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Was this instruction helpful to you?
Thank you for voting!