Models > 1108151845 > Instructions

1108151845 Kenmore Dryer - Instructions

Jump to:

All Instructions for the 1108151845
1 - 15 of 65
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Fairfax, VA
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
35 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chris from Morgan City, LA
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old lint screen -torn at wire mesh
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
27 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
michael from allen, TX
Parts Used:
WP688865
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
THe problem was the knob had cracked slightly around the edges, and would no longer turn the shaft.
It couldn't be easier. I removed the old knob and stuck the new one on the shaft. Perfection in less than 15 seconds!

I am thankful that PartsSelect had this replacement knob. I tried repairing the old one, first with super glue and finally with heat-shrink tubing. Both worked for a while, but eventually the knob epanded enough to not turn the shaft.
27 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Farmington Hills, MI
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The old lint screen on the dryer was broken
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
24 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Bristol, CT
Parts Used:
W11778253
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
part number was different from the original, but it fit just fine.
installed the new dryer lint screen, it fit perfectly
and is now in operation.
20 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from UNIVERSITY PL, WA
Parts Used:
WP688865, WP688805
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Timer knob was cracked, missing spring clip and wouldn't set accurate drying time
I ordered the timer knob and read that I also needed the knob spring clip (this part is non-returnable), so I ordered both. Upon arrival I found that the knob spring clip already comes installed inside the shaft of the timer knob. So you don't need to order both. It was the easiest repair I've ever done. Just position timer knob on D-shaped shaft of dryer timer and push until knob clicks into place.
11 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ed from Greensboro, NC
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace lint filter
with both hands
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RICK from JOHNSON CITY, TN
Parts Used:
WP688865
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Timer Knob
Lined the flat side of the knob with the timer stem and simply pushed it on.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Evanston, IL
Parts Used:
WP688865
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knob broke and fell off
Ordered the new knob. That's all.
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Kingman, AZ
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old screen failed ripped needed replaced.
After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Connie from Gaithersburg, MD
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
handle broke on filter
just slide the new filter in.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Don from Dayton, TX
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lint Filter wore out had to be replace
Changed out the lint filter
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peggy A from La Place, LA
Parts Used:
WP688865
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
timer knob broken
Just put the knob on where old knob was.
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anita M from Austin, TX
Parts Used:
WP688865
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob broke when my mom tried to dry clothes
i took the old knob off, went to partselect and ordered the part really easy as their site helped me find the correct part, and put it on with ease when it came in the mail. It works great and PartsSelect helped me be a hero to my wonderful mom. Thanks.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from New Bedford, MA
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken handle
1) removed the old broken filter
2) deposited it in nearby wastebasket (with lint attached)
3) used scissors (see above) to remove plastic cover from new lint filter
4) inserted new lint filter
5) marveled at my handiwork!
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 1108151845
1 - 15 of 65