Models
>
1108151845
1108151845 Kenmore Dryer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$46.50
This is a single OEM white lint filter for your dryer, located on the top of the appliance. It prevents lint from getting into the exhaust vent and on your clothes. It is very important to clean the l...
In Stock
In Stock
In Stock
$8.00
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
In Stock
In Stock
In Stock
This is a high temperature adhesive that is used for gaskets and felt seals.
In Stock
In Stock
$26.04
Cleaning brush for coils on refrigerator and freezers, dryer lint filter housings, and more.
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- michael from allen, TX
- Parts Used:
- WP688865
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
THe problem was the knob had cracked slightly around the edges, and would no longer turn the shaft.
It couldn't be easier. I removed the old knob and stuck the new one on the shaft. Perfection in less than 15 seconds!
I am thankful that PartsSelect had this replacement knob. I tried repairing the old one, first with super glue and finally with heat-shrink tubing. Both worked for a while, but eventually the knob epanded enough ... Read more to not turn the shaft.
I am thankful that PartsSelect had this replacement knob. I tried repairing the old one, first with super glue and finally with heat-shrink tubing. Both worked for a while, but eventually the knob epanded enough ... Read more to not turn the shaft.
Read less
Was this instruction helpful to you?
Thank you for voting!
Timer knob was cracked, missing spring clip and wouldn't set accurate drying time
I ordered the timer knob and read that I also needed the knob spring clip (this part is non-returnable), so I ordered both. Upon arrival I found that the knob spring clip already comes installed inside the shaft of the timer knob. So you don't need to order both. It was the easiest repair I've ever done. Just position timer knob on D-
... Read more
shaped shaft of dryer timer and push until knob clicks into place.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RICK from JOHNSON CITY, TN
- Parts Used:
- WP688865
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Timer Knob
Lined the flat side of the knob with the timer stem and simply pushed it on.
Was this instruction helpful to you?
Thank you for voting!