66213292K112 Whirlpool Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gordon from HERMISTON, OR
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
One wheel broke on left side rack adjuster so the rack kept falling out of the guide rail
Found replacement instructions on the Internet and followed them to replace the left side rack adjuster. This was very easy but took the longest since I had never done it before. Right side literally took a fraction of the time since I had already done it once!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PAT from RENO, NV
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken tab securing roller wheel
Removed broken adjuster by prying open latch tabs. Assembled replacement per instructions. Had to test fit parts due to poor illustrations, compared to other adjuster for correct installation. 2nd side went much quicker
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from PASADENA, CA
- Parts Used:
- W10712394
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
roller wheels on rack broke-- needed replacement / repair
"level of difficulty" and "time to repair" are very tricky. IF I'd have relied on the supposed detailed photos sent with the parts, the "level of difficulty" would have been "impossible" and the "time to repair" would have been "takes forever; still trying to figure it out." However, as another commentator mentioned, there is a Youtube clip from KitchenAid that walks you through it. With that-- "difficulty" became "very easy" and time to repair became "10 minutes". Definitely watch the Youtube clip!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from CROTON HDSN, NY
- Parts Used:
- W10712394
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Poor Directions
Use of black/white pictures made it hard to see part details. Use grayscale insted. Also provide a schematic of the parts involved. The similarity of names made it hard to determine which part was being referred to. used magnifying glass and a lot of trial and error to resolve instalation problems. Second set of rollers went smoother.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from SOLOMON, KS
- Parts Used:
- W10712394
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Wheels missing
Took old parts off after removing rack. Installed new track adjusters
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from ROSWELL, GA
- Parts Used:
- W10712394
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
The shaft to the roller wheels to the upper basket had failed causing a wheel to fall off
. This is the second time we have had this defect with this machine. Apparently due to the frequent failures KitchenAid have redesigned the whole adjuster assembly using a mix of materials rather than all plastic. I was therefore supplied two complete assemblies, for which both existing assemblies had first to be removed. The installation instructions supplied with these replacements were not clear, although the text was intelligible. The photographs of the required work as "figures" were however almost unintelligible. The first side took a long time to complete with much trial and error. Once complete this followed as a model for the second side that went much quicker. Most important to watch for the side of the sliders to be outwards since the illustration is wrong. A similar situation exists with the adjustment button and assembly which can be installed in any of four ways, although only one will work. Finally an "errata" insert indicated that a special tool was included in the hardware set for installing the two screws using a Phillips screwdriver; this was not included in my set, although fortunately I had a socket set with this tool included.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from SUDBURY, MA
- Parts Used:
- W10712394
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
upper rack roller mechanism failed (wheels broke off)
Replaced adjustor mechanisms on both sides. Instructions enclosed with the parts kit were pretty much useless - photographs were dark and blurry and not very helpful. Removing the old parts was the most difficult part of the job, and all that the instructions said about that was "remove old parts". I found an excellent video on YouTube by a gentlemen named "Matt" which saved the day; couldn't have done the job without the video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from CANTON, MA
- Parts Used:
- W10195416
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken wheel
Easy. Just watched video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from FRAMINGHAM, MA
- Parts Used:
- W10195416
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Wheel came off. Hub that held the wheel to the assembly got burned by heater.
Look at the way that 3 remaining Wheel Assemblies were attached to rack, Then pop off the offending assembly and attach the new one. Less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from WHITEHALL, PA
- Parts Used:
- W10195416
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
Wheels kept coming off.
Took off the broken part replaced it with new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lana R from THE HILLS, TX
- Parts Used:
- W10195416
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
The wheel fell from the lower dish rack--the front left hand side.
We snapped the old one off --it did not break. We positioned the new one in the right place making sure that the slot in the middle matched up with the longitudinal wire of the rack and snapped it in place. EASY!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from FREEBURG, IL
- Parts Used:
- W10712394
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
wheel on rack broke off
Removed old adjuster rack from both sides using a screw driver. Followed directions provided with rack adjuster kit and installed new adjuster on both sides.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- THOMAS from NEENAH, WI
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Rack Adjusters Replacement
This was my 4th time replacing these parts. Old parts where all plastic and I was lucky to get 6 months before they all disintegrated from the hot water washing. New parts are steel and replacing the old plastic parts was a piece of cake. Looks and even feels much stronger! Excellent youtube video
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Macedon, NY
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic stays holding rack adjuster wheels break off so it comes out of wheel track.
Instruction sheet is good but should stress that the thumb pads must face the front side of the dishwasher.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from KITTANNING, PA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Top dishwasher rack rollers broke
Really went well. Very easy to repair
Was this instruction helpful to you?
Thank you for voting!