66213292K112 Whirlpool Dishwasher - Instructions

Got all the parts but no installation instructions. Saw the comment about youtube,, reviewed that and everything when together great.

Parts came with instructions however I just searched the part #on you tube and found a video of someone doing the repair. That made it super easy. Took me only about 20 min for the whole job and I am not a very “handy” guy. So glad I didn’t pay someone to come out to do this. Easy repair! In a nutshell you completely remove the old housing and wheel structure and replace it all with the new parts so when taking off the old parts don’t worry about breaking them.

Nomenclature of parts were not named with a drawing, Photos of instructions were very dark and unable to ascertain which was which , they were worthless. It took me 20 minutes to figure out where the new parts belonged. Keep in mind the new parts were different than the old parts. A simple sketch would have helped a lot.

I ordered this thinking I would probably need more parts, but was unsure which ones. When the part arrived I immediately noticed that it was not identical to the original part, but looked like it may work. I also received an instruction book that I did not expect. The first side probably took 15 or more minutes. The second side was installed in just a couple minutes. The toughest part was removing the old pieces.

Very, Very easy - watched the Installation Video highlighted on web page and the entire process took less than 5 minutes!

To remove the old parts off the top rack I used a jack knife & a needle nosed plier. The pictures were small in the instructions especially where it showed the small backing plate that held the part that slides up & down. I installed it wrong but I could easily remove it once I pushed in the the tab with a knife blade & then installed it correctly. The updated metal wheels are a big improvement & it works fine now. Huge savings because I did it myself, anyone can do it if you're not in a hurry.

These are the best set of directions I’ve ever seen for any replacement part on any appliance. Well done .

followed enclosed directions. needed to replace both side as repair parts come as complete set. might add that repair part is stainless steel and easy to work with

You tube feature on the replacement made it a very, very easy job.

While watching my infant daughter! The information strict ions and illustrations made my repair go easily. I removed the old parts and replaced the parts with ease.

Found replacement instructions on the Internet and followed them to replace the left side rack adjuster. This was very easy but took the longest since I had never done it before. Right side literally took a fraction of the time since I had already done it once!

On my kitchen counter! Repair was relatively easy. New adjuster appears to be substantially stronger than old!

Replaced adjustor mechanisms on both sides. Instructions enclosed with the parts kit were pretty much useless - photographs were dark and blurry and not very helpful. Removing the old parts was the most difficult part of the job, and all that the instructions said about that was "remove old parts". I found an excellent video on YouTube by a gentlemen named "Matt" which saved the day; couldn't have done the job without the video.

. This is the second time we have had this defect with this machine. Apparently due to the frequent failures KitchenAid have redesigned the whole adjuster assembly using a mix of materials rather than all plastic. I was therefore supplied two complete assemblies, for which both existing assemblies had first to be removed. The installation instructions supplied with these replacements were not clear, although the text was intelligible. The photographs of the required work as "figures" were however almost unintelligible. The first side took a long time to complete with much trial and error. Once complete this followed as a model for the second side that went much quicker. Most important to watch for the side of the sliders to be outwards since the illustration is wrong. A similar situation exists with the adjustment button and assembly which can be installed in any of four ways, although only one will work. Finally an "errata" insert indicated that a special tool was included in the hardware set for installing the two screws using a Phillips screwdriver; this was not included in my set, although fortunately I had a socket set with this tool included.

"level of difficulty" and "time to repair" are very tricky. IF I'd have relied on the supposed detailed photos sent with the parts, the "level of difficulty" would have been "impossible" and the "time to repair" would have been "takes forever; still trying to figure it out." However, as another commentator mentioned, there is a Youtube clip from KitchenAid that walks you through it. With that-- "difficulty" became "very easy" and time to repair became "10 minutes". Definitely watch the Youtube clip!!