66213292K112 Whirlpool Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jeffrey from DAVISON, MI
- Parts Used:
- W10712394
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Pup per rack wheel hubs broke
I took the upper rack out set it on its side and followed the instructions that came with the parts. Then turned it on the other side and repeated the instructions. The nice part about the instructions is they they came with clear photographs of each step in the instructions. You could clearly see how the parts were suppose to fit. No guessing at all. Great job, who ever created them. I will not hesitate to but parts from this website and is saved in my favorites.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from BALDWINSVILLE, NY
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
wheels fell off the rack
replaced both sides of rack with the new metal parts. easy to do once you realized you what part went where. the instruction pictures could have been bigger or clearer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from HANSVILLE, WA
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The wheel broke off the upper rack
The repair was easy. The replacement parts fit perfectly and the instructions were great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ann from HGHLNDS RANCH, CO
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Installation of new wheel tracks for upper basket
Pulled old broken parts off with a little brute force. Installed the new parts and pieces, per directions provided (with pictures!), and placed back in dishwasher. It was easy! Made sure to install new wheel tracks forth set of tines from back of basket, slide parts into place and secure with screws provided. Only extra tool needed is a Phillips head screwdriver.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from BAINBRIDGE IS, WA
- Parts Used:
- W10712394
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Upper dish rack adjuster failed
Figured out what was worn and went to website to order replacement parts. Three days later the parts show up, I find the replacement parts are better build than the original parts. Took less than 30 minutes to repair and reinstall. Works perfect. Website was easy to use and the repair was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from GILBERT, AZ
- Parts Used:
- W10712394
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
clip holding the rollers broke allowing one side to drop
The repair kit was easy to install, required a torque tip screw driver and thin flat head screw driver to remove the old parts. Took me 15 minutes start to finish. Simply follow the instructions provided with the kit. Nothing else needs to be said.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dan from LOVELAND, CO
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Upper rack wheels would not stay on. Axels were worn down from use.
Removed upper rack.Replaced both side rack adjusters purchased from Kitchen Aid. Replaced upper rack and checked for easy operation. They were made superior to original parts, what I would call an upgrade. The instructions are well written easy to follow and in order of completion. One word of advice, dont snap keepers in place untill you are sure they are in correctly. The picture quality could be improved to better assist anyone not used to doing these type of tasks.
D Burton
D Burton
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from PUNTA GORDA, FL
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken wheels on adjusters
Unsnapped old adjusters, new ones went in easy after reading instructions.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from SARATOGA, CA
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Upper rack wheel supports broke
Fairly straightforward install of the kit parts. I was glad to see the new parts were stainless steel and not the weak plastic. I wish I would have known this - I ordered two kits instead of one because I figured it would break again soon. I was very glad to finally find the included screwdriver to torx adapter - I forgot my torx set.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roy from CHANDLER, AZ
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken wheels on top rack
The instruction included were pretty comprehensive. Also, it is not a difficult fix. Only thing I did different was install the release arm before snapping the upper part on to the rack. Liked the Phillips screw converter included in case someone does not have star bits for the screws. Returned the stop Clips, not needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from CARMEL, IN
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Rollers had broken off
Followed directions supplied with part. Direction pictures were dark and hard to see details. Hex adaptor for screwdriver was too hard to use because made of plastic. Used my own hex wrench, which gave more leverage to drive screws into plastic pieces.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from SOUTH EASTON, MA
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
broken rack adjuster
took top rack out and put pieces in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Eagle, NE
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Wheels snapped off of original plastic rack adjusters
Removed the old broken pieces, and installed the new awesome Stainless steel replacements as directed in the supplied instructions . Inserted the 4 supplied screws and gently tightened them. New parts have been redesigned and are MUCH sturdier than the old plastic parts. Some simple assembly is required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GAIL from PADUCAH, KY
- Parts Used:
- W10712394
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Wheels on rack adjuster broke off
Followed the installation instructions. Photos on installation instructions were not very easy to see, but instructions were good.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from ESTERO, FL
- Parts Used:
- W10195416
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken wheel
Remove old assembly: use screwdriver to depress 2 wedges that lock assembly on wire rack. After removed. new assembly will snap into place
Was this instruction helpful to you?
Thank you for voting!