Models > 66213043K112 > Instructions

66213043K112 Whirlpool Dishwasher - Instructions

Jump to:

All Instructions for the 66213043K112
61 - 75 of 330
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David L. from OCOEE, FL
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Track wheel retainers broke which would allow the rack adjuster to drop from the rail.
Followed the written instructions provided with the new adjuster replacement kit. No problems with the removal and replacement of the adjusters.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from E NORTHPORT, NY
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broke wheels on upper rack
Watched instruction video on You Tube. Easy to figure out how old adjuster came off. Followed instructions from video on installation. Did not have proper star screwdriver, but was able to use allen wrench on two screws.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
kevin from MINOT, ND
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
rack adjuster wheels broke
You have to go online and watch a video of how to install the replacement part. Ten or so minutes later you are done.You tube makes everything easier.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Richview, IL
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Wheels which support the rack broken
Followed the instructions included with the kit, took a little while to figure out what the photos were showing. But essentially installation was easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dan from LOVELAND, CO
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Upper rack wheels would not stay on. Axels were worn down from use.
Removed upper rack.Replaced both side rack adjusters purchased from Kitchen Aid. Replaced upper rack and checked for easy operation. They were made superior to original parts, what I would call an upgrade. The instructions are well written easy to follow and in order of completion. One word of advice, dont snap keepers in place untill you are sure they are in correctly. The picture quality could be improved to better assist anyone not used to doing these type of tasks.
D Burton
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from KITTANNING, PA
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Top dishwasher rack rollers broke
Really went well. Very easy to repair
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Amanda from SPOKANE, WA
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
The plastic grips broke off and would hold the top rack on the tracks.
It was so easy! Broke of the already broken supports and followed the easy step by step instructions with pictures.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
phillip*HOCOTT from WAYNESVILLE, NC
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Upper dish rack shelf track rollers.
First of all, the initial manufacture of the shelf rack rollers was substandard, and I replaced the left side less than a year ago, and both left and right side failed (rollers came off, causing shelf to drop down....not good!) When I "reordered' the parts the second time, I was pleased to see a "kit" was sent to replace "both" sides! Smart! I needed no tools, replaced the right side in 15 minutes, and the left side in 3 minutes. Much better than original parts! Thanks guys!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from UNDERWOOD, IA
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the wheels for the slide on the top rack broke off on one side
the delivery time was terrific for the first thing. I placed all the parts out on the table and the instructions were very direct and simple to follow. it took more time to figure out the removal of the old plastic parts, but was very easy after you find where to place the screw driver to open the side cover and let the old adjuster fall apart. The new parts went in as directed by the directions, and pictures, very simply and it only takes a few minutes to complete and reinstall the top rack in the dishwasher. I was very pleased with all of the service.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from DUVALL, WA
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
BOTH SIDES OF UPPER WHEEL ASSEMBLY BROKE AND WHEELS FELL OUT.
Basically I just had to look at the instructions that came with replacement kit and follow the directions as shown.The included pictures for the kit were not very clear. Poor quality ! That being said, this install went very smooth, The directions were easy to understand and I had this dishwasher back up and running in no time. It was a pleasure to actually get this unit fixed so quickly. Thank You !!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ann from HGHLNDS RANCH, CO
Parts Used:
W10712394
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Installation of new wheel tracks for upper basket
Pulled old broken parts off with a little brute force. Installed the new parts and pieces, per directions provided (with pictures!), and placed back in dishwasher. It was easy! Made sure to install new wheel tracks forth set of tines from back of basket, slide parts into place and secure with screws provided. Only extra tool needed is a Phillips head screwdriver.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from CHAGRIN FALLS, OH
Parts Used:
W10712394
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Plastic wheels broke off when toddler pulled on it
Followed the pictures not hard at all.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from REDMOND, OR
Parts Used:
W10712394
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Roller wheels on upper basket of dishwasher had broken off.
The enclosed instructions were black and white, faded, with pictures subsequently fuzzy and difficult to analyze. The experienced DIYer will figure this one out with or without the instructions, but the less experienced DIYer may well struggle a bit here. There are two sides to be repaired. The first side took me 15 minutes to slowly puzzle out, the second side was less than 5 minutes once I grasped how all the pieces fit together.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathryn from FREEBURG, IL
Parts Used:
W10712394
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
wheel on rack broke off
Removed old adjuster rack from both sides using a screw driver. Followed directions provided with rack adjuster kit and installed new adjuster on both sides.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from CLARENCE, PA
Parts Used:
W10712394
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken wheel
The instructions that were included were a bit scetchy, but we figured it out. I like that the replacement part is made of medal and not plastic. We first put the clips on top then figured out they go below middle bar after that it all came together
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 66213043K112
61 - 75 of 330