DB3710DB Samsung Dishwasher - Instructions

This was the easiest repair I have ever done! Ordered in a few mins, and received the very next day. Opened the box and installed the two wheels - Done. That was Easy! Thank you so much for such quick service! Most definitely will use your company again in the future.

Pushed them on

Calcium build up from our hard water had plugged varous parts of the dishwasher. Dismantling all the parts for cleaning had resulted in my braking the retaining tabs on the upper sprayer arm, that snaps into a plastic clip that attaches to a flat water distribution tube running from the base of the dishwasher up the back and then over the inside top of the compartment. Replacement is literally a snap. Make sure your get good visualizaton of how to remove the various plastic pieces from the metal or plastic clips that secure them to the inner wall of the dishwasher. Don't do the work only by feel; as I tried to do. Positioning your body to get a good look is, at best, awkward

Took the door of the dishwasher apart and the replaced the lever assembly. The lever assembly does not come with a door handle, so you have to remove the old door handle from the old lever assembly and install the door handle on the new lever assembly. Installing the handle on the lever assembly was the hardest part, the rest of the installation was easy.

The latch that opens the door to the diswasher was broken. It became difficult to open the dishwasher door.

A quick search on the internet using the machine make and model took me to Partselect.com. Another quick seach of the exploded views of my dishwasher gave me the part number and a few more clicks had it on order.

I recieved the part buy the end of the week. and had it installed within 15 to 20 minutes and I was up and running.

What a deal!!! Thanks

the removal of panel was simple, the removal of electrical connections was difficult even with a little wd 40 i was nervous when any metal part is attached to a plastic part. it didn't want to let go but my suggestion is to work the connecter back and forth forward and back to get it started then with a firm grip on the wire harness with pliers pull the two apart with pliers. good luck!!!

Opened the dorr, removed the inside panel = the most time consuming part - and then exchanged the handle assembly. Then replaced the panel. Snap!
The hardest part was determining the part that I needed - the right part that did not involve repairing the/an assembly. Luckily I got the right one and two un-needed parts.

Stuff happens.

All screws are on the inside of the dishwasher.Not a good place when the washer is closed and the handle breaks.Had to take a box cutter and remove some plastic in the handle area to be able to remove broken handle and open dish washer.Once open this repair is a piece of cake.2 wires and a hand full of screws.

After checking the door switch I found the micro switches were working but the unit would not start on the control panel. Thinking the latch was worn, I ordered a replacement. After changing the replacement latch and switches that came with it, the unit would still not start. I checked the switch and it is making contact. I can start the unit after I close the door using the handle of a pair of pliers. So I assume the control board is bad, due to the fact that it will not initialize the control panel until the door is closed. Now I have ordered a control board and will replace...stay tuned!!

Finally had to remove front foot panel and laminated top. Removed screws on back and one side to get to open cabinet to insert hose properly.

Pried door open. First ordered the wrong part...latch assembly with no handle. Reordered proper part and installed it in no time. Ordered regular shipping (cheapest) and in both instances parts were there in two days via Fed Ex. Very quick getting the parts to me.
Removed half of the screws on inside of door and used pliers to unhook assembly from the two power connectors and then popped new one in place by hand. All repairs should be this easy. I will use this company again for all appliance parts needed.

I removed the screws on the interior door cover plate, pulled the cover plate back which exposes the latch switch. I then pulled the two electric connectors off the switch, swapped out new switch, reconnected electric and put the screws back in. Simple repair which took not more than 15 minutes and solved the problem.

After prying open the door i removed the inner skin cover which did provide me access to the latch assy,2 additional screws and it was fixed.

This appears to be a problem with this apliance since it has done this before while under warranty

removed all the torx screws that hold the inside panel to the door. Removed the latch/switch.[Don't forget to turn off the power] Could not remove the wiring harness from the micro switch so I removed the old micro switches from the old switch and moved them to the new switch, harness and all. repositioned the latch and reattached the panel.
there are two latches available. I ordered the wrong one at first. Got the correct one in just two days. Was able to return to wrong one for credit.
Great service. Glad I didn't call a repairman.

Matching the part I had in my hand with the picture online was a cinch. Rec'd the latch in a few days, and installed it in minutes. Why did I wait so long to look it up and order? At least the kids think I'm a hero for fixing the dishwasher!